Reassembling The Treadmill Fairing - Precor TRM 800 Assembling And Maintaining Manual

42

Reassembling the Treadmill Fairing

After the console is in place, reattach the two cover panels of
the treadmill fairing.
Important: In the following procedure, do not allow the fasteners
to break or pinch any cables.
To reassemble the fairing:
1.
2. Snap the rear cover into place and attach the seven
3. Hold the center column cover in place and attach the two
Assembling and Maintaining TRM 800-Series Treadmills
Verify that the cable assembly is secure inside the cable
clips and that the ferrite bead on the base unit data cable
is tied securely into place in the left arm of the treadmill.
screws you removed with it earlier.
Figure 27: Removal and replacement of the rear fairing cover
screws you removed with it.
Figure 28: Removal and replacement of the center column
cover