Unpacking The Cables - Precor TRM 800 Assembling And Maintaining Manual

18

Unpacking the Cables

To connect the console to the base unit, you may need up to
five cables, as follows:





The first three of these cables are shipped with the P80
console. The remaining two are shipped inside the treadmill
fairing.
To unpack the cables:
1.
2. Remove the two screws holding the center column cover
Assembling and Maintaining TRM 800-Series Treadmills
Ethernet (P80 only)
Television (P80 only)
Power (P80 only)
Base unit data
Automatic stop sensor (Auto Stop
Open the box containing the P80 console. Retrieve the
Ethernet, television, and power cables.
in place. Remove the cover and set it aside, along with the
two screws.
Figure 3: Removal and replacement of the center column
cover
™ )