Installation Requirements - Precor TRM 800 Assembling And Maintaining Manual

16
5. Remove the shipping fasteners from the front panel using
6. Remove any tape or wire ties securing the console cable
Before you begin, verify that you have received the following
parts:





Installation Requirements

The location where the treadmill is installed must provide
power connections that supply the appropriate voltage, a 20A
dedicated branch circuit, and grounding as specified on the
treadmill.
CAUTION: Do not use a non-grounded outlet or transformer. Do
not remove or otherwise bypass the plug with an adapter.
Electrical damage can occur and void the Precor Limited Warranty
if the treadmill is connected to an improper power source.
Required Tools







Assembling and Maintaining TRM 800-Series Treadmills
a ¹₄-inch hex key and a ¹⁄₂–inch box-end wrench.
to the side of the unit.
Base frame assembly
Left and right upright supports
Center fairing with handrails
Hardware kit
¹₄-inch hex wrench
⁵₃₂-inch hex wrench (ball end is desirable)
¹₂-inch box-end wrench
Bubble level
#2 Phillips screwdriver
String or fish tape
Wire cutter