Using The Treadmill Safety Clip - Precor TRM 800 Assembling And Maintaining Manual

54

Using the Treadmill Safety Clip

The treadmill is equipped with two different stop functions,
which behave as follows:
If the user ...
Presses down on the red
STOP button
Pulls on the lanyard
attached to the safety
clip and trips the restart
switch
The restart switch is located just below the console and
immediately behind the red STOP button, as shown in the
following illustration. When it is tripped, the bar pops up,
displaying the words PUSH TO RESET SWITCH on its front
side. The treadmill does not operate while these words are
visible.
Figure 30: Restart switch
Instruct users on how important it is to use the safety clip
while exercising on the treadmill, and demonstrate how they
should attach it to their clothing near the waistline.
Assembling and Maintaining TRM 800-Series Treadmills
Then the And the console ...
treadmill
belt ...
Slows to a Shows that the exercise
stop workout is paused
Slows to a Shows the words PUSH TO
stop
RESET SWITCH and an
arrow pointing to the
Restart switch