Precor TRM 800 Assembling And Maintaining Manual page 24

Precor treadmill user manual

Hide thumbs Also See for TRM 800:

Table of Contents

To thread cables through the frame:

2. Feed the cable assembly through the grommet in the

Assembling and Maintaining TRM 800-Series Treadmills

Feed the cable assembly downward through the left-hand

upright support and out through the opening in the lower

end of the support. Drape the remaining cable over the

front of the support and tape it into place if necessary to

secure it temporarily.

left-hand side bracket of the base frame. Connect the

individual cables as shown in the following illustration and

table.

Figure 8: Cable connections and mounting points in the

treadmill base

Table 1. Cable connections and mounting points in the

treadmill base

Component

Base unit data

cable

Ethernet cable

Appearance

Flat with silver insulation

Flat with black insulation

Lower connection

point

Table of Contents

Show Quick Links

Table of Contents

Trm 800-series