Quick Reference For Bar Code Control Commands - Brother HL-6050 User Manual

Quick reference for bar code control commands

The printer can print bar codes in the HP LaserJet, EPSON
FX-850, and IBM Proprinter XL emulation modes.
Print bar codes or expanded characters
Code
Dec
Hex
Format:
Creates bar codes or expanded characters according to the segment of parameters "n ... n". For more
information about parameters, see the following Definition of Parameters. This command must end with
the " \ " code (5CH).
Definition of Parameters
This bar code command can have the following parameters in the parameter segment (n ... n). As
parameters are effective within the single command syntax ESC i n ... n \, they don't apply in the bar code
commands. If certain parameters are not given, they take the preset settings. The last parameter must
be the bar code data start ('b' or 'B') or the expanded character data start ('l' or 'L'). Other parameters
can be given in any sequence. Each parameter can start with a lower-case or upper-case character, for
example, 't0' or 'T0', 's3' or 'S3' and so one.
Bar code mode
n = 't0' or 'T0
n = 't1' or 'T1
n = 't3' or 'T3'
n = 't4' or 'T4'
n = 't5' or 'T5
n = 't6' or 'T6
n = 't9' or 'T9
n = 't12' or 'T12
n = 't13' or 'T13
n = 't14' or 'T14
n = 't130' or 'T130
n = 't131' or 'T131
n = 't132' or 'T132
n = 't133' or 'T133
n = 't134' or 'T134
This parameter selects the bar code mode as shown above. When n is 't5' or 'T5' the bar code mode
(EAN 8, EAN 13, or UPC A) varies according to the number of characters in the data.
Downloaded from ManualsPrinter.com Manuals
ESC i
27 105
1B 69
ESC i n ... n \
CODE 39 (default)
Interleaved 2 of 5
FIM (US-Post Net)
Post Net (US-Post Net)
EAN 8, EAN 13, or UPC A
UPC E
Codabar
Code 128 set A
Code 128 set B
Code 128 set C
ISBN (EAN)
ISBN (UPC-E)
EAN 128 set A
EAN 128 set B
EAN 128 set C
APPENDIX (SPECIFICATIONS, FONTS AND BAR CODE) A - 7