Save Macro With Specified Id; Save Image (Fixed Printing Location) - Brother PCL Technical Reference Manual

3.6.3

Save macro with specified ID

Command
ESC & f 1038X
Available Devices
F, A, H, I
Description
This command saves a macro with the ID which is specified with the ESC & f # Y (Macro ID
Configuration) command on the device.
When two devices are installed into the printer, the command saves the macros on the device specified by
the select storage device command. When only one device is installed, the command saves the macros on
that device.
This command is only valid in PCL emulation.
Error
HL-1660e/2060/2400C:
43 CARD1 W ERROR
43 CARD2 W ERROR
HL-2400Ce/3400CN
43 DEVICE1 W ERROR
43 DEVICE2 W ERROR
43 DEVICE3 W ERROR
HL-2460/3260N/2600CN/3450CN/7050:
43 CARD ERROR
43 HDD ERROR
HL-1650/1670N/1850/1870N/5070N/5170DN/5270DN/5280DW:
43 SERVICE E74
HL-6050/6050D/6050DN/8050N/2700CN:
43 CARD ERROR
Save image
3.6.4 (Fixed printing location)
Command
ESC CR ! 12348F
Available Devices
F
Description
After transferring the last print data into the image data area, this command saves the data with the ID
which is specified with the ESC & f # Y (Macro ID Configuration) command as a PCL command on
the device.
The printing location for the saved data is fixed on the page.
The data can be executed by the data execute command (ESC CR ! 12349 F).
When two devices are installed into the printer, the command saves the data on the device specified with
the select storage device command. When only one device is installed, the command saves the data on
that device.
This command is only valid in PCL emulation.
Error
HL-1660e/2060/2400C:
43 CARD1 W ERROR
43 CARD2 W ERROR
HL-2400Ce/3400CN/2600CN/3450CN:
43 DEVICE1 W ERROR
43 DEVICE2 W ERROR
43 DEVICE3 W ERROR
APPENDIX B - FLASH/PCMCIA CARD COMMANDS - 13
2006/05/31