Operating The Lawnmower In The Manual Mode - Honda Miimo HRM1000 Owner's Manual

Operating the lawnmower in the Manual mode

Operating the lawnmower in the Manual mode
*If your lawnmower model type is HRM1000, use Mii-monitor on smartphone/tablet. Refer to "5 Mii-monitor
Preparation" (M page 79).
Use the Manual mode when you want to ignore work timer settings.
As an example, you can move the lawnmower by yourself if there are two or more separated mowing areas
within the boundary wire, the mower cannot travel between the areas.
Set the following necessary settings such as [Mowing pattern] to operate in the Manual mode.
Selecting the mowing pattern
Home screen
[2.Mowing pattern]
pattern from [Random], [Directional] or [Mixed].
For details, see "Mowing pattern"(M page 56).
Wire overlap
Home screen
[3.Advanced setting]
For details, see "Wire overlap"(M page 57).
Edge cutting
Home screen
[3.Advanced setting]
For details, see "Edge cutting"(M page 58).
Spiral cutting
Home screen
[3.Advanced setting]
For details, see "Spiral cutting"(M page 60).
90
Menu screen
[2.Garden setup]
J
[2.Manual mode]
J
Menu screen
[2.Garden setup]
J
[1.Wire overlap].
J
Menu screen
[2.Garden setup]
J
[2.Edge cutting]
J
Menu screen
[2.Garden setup]
J
[3.Spiral cutting]
J
[1.Mowing setup]
J
Select the mowing
J
[1.Mowing setup]
J
[1.Mowing setup]
J
[1.Mowing setup]
J
J
J
J
J