Adjusting Red/Green/Blue In Copies (Rgb Adjust) - Sharp MX-7090N User Manual

COPIER►OTHER FUNCTIONS
ADJUSTING RED/GREEN/BLUE IN COPIES (RGB
ADJUST)
This function heightens or lightens any one of the three color components R (red), G (green), and B (blue).
RGB must be specified before scanning the original.
Tap the [Others] key, and tap the [RGB Adjust] key.
1
Tap the key of the color you want to adjust.
2
3 Others
RGB Adjust
Any one colour can be adjusted.
This setting is only applied to colour.
Off
R(Red)
G(Green)
B(Blue)
Back
• Only one color can be adjusted. (If you adjust one color and then tap another color, the adjustment of the first color is
canceled.)
• To cancel the RGB adjust setting:
Tap the [Off] key.
Place the original.
4
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-90)
► DOCUMENT GLASS (page 1-92)
To cancel all settings:
Tap the [CA] key.
Tap the [Color Start] key to start copying.
5
R(Red)+
G(Green)+
B(Blue)+
Original
Change Size/Direction.
Intensity
Adjust Intensity
Color Mode
Exposure
Select Type/Exposure
-2 -1 0 1 2
Color Balance
Adjust Color Tone
Proof Copy
Touch [+] to darken and [-] to lighten
selected colour tone.
Preview
8½x11 8½x11
B/W
8½x11 5½x8½
6 8
3 8½x14
Start
4 8½x11 8½x11
11x17
Tap or slide the slider to adjust
the coloring.
After the settings are completed, tap
CA
Color
Start
2-136
twice.