Sharp MX-7090N User Manual page 210

COPIER►BASIC PROCEDURE FOR MAKING COPIES
Stapling each set of sorted copies
The setting procedure in normal mode is explained.
Tap the [Detail] key to change to normal mode.
1
► Changing mode from each mode (page 2-5)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-33)
Tap the [Output] key.
2
3
Output
Output Tray
Upper Tray
Middle
Tray
Lower Tray
Default Settings Staple
Off Off
1 Staple
Trimmer
2 Staples 2 Staples
Setting
Others
If the number of scanned originals exceeds the staple sheet limit, a message is displayed. Tap the [Continue] or [Cancel]
key.
[Continue]: Continues sorting without stapling.
[Cancel]: Cancels the staple sort setting.
To cancel the staple function:
Tap the [Off] key.
Original
1
No. of copies
Change Size/Direction.
2-Sided Copy
N-Up
Put Multiple Pages in A Page
Margin Shift
Shift Position to Have Margin
Erase
Offset Offset
Erase Shadow Around
Punch Fold
Proof Copy
Position Position
Left Left
Preview
Saddle
Stitch
Top Top
Original Original
Right Right
B/W
6 8
3 8½x14
Start
4 8½x11 8½x11
11x17
Tap the [Staple] tab, and tap the staple
position key.
Tap the [Original] key to chenge the original settings.
Staple position can be selected from "Position" when
selecting keys other than [Off], and [Saddle Stitch].
After the settings are completed, tap
CA
Color
Start
2-50
.