Sharp MX-7090N User Manual page 101

BEFORE USING THE MACHINE►STOPPING/DELETING A JOB, PRIORITY PROCESSING AND CHECKING THE STATUS
Changing the job order
If there is a job in progress, an interrupt job can be performed, or a job can be moved down in the queue to change the
job order. Tap the key of the job you want to move, and tap the "Priority Change" key.
Print Scan
Job Queue Progress / Sets Status
Job
0100/0100
Paper Empty
Copy
Waiting
Copy 0000/0001
• key
Moves the selected job to the top of the queue. The current job will be interrupted and the selected job starts.
• key
Moves the selected job up one position. When the second job from the top is selected, tapping this key interrupts the
current job and starts the selected job.
• key
Moves the selected job down one position.
• key
Moves the selected job to the bottom of the queue.
Scanner job with a timer setting
When a scanner job with a timer setting is selected, tapping the order change keys moves the job as follows.
• key
The timer setting is canceled and the job moves to the position after the job in progress (second from top).
• key
The timer setting is canceled and the job moves to the lowest position in the queue (if there are 3 jobs, the 4th
position)
• , key
These keys cannot be used.
The jobs below cannot be moved.
Job currently in progress, interrupt copy jobs, list print jobs, and jobs when Passing Prohibited is set in the system settings.
File Retrieve
Start
Time
Priority Change
─
Calculating
Spool
Job Queue
Complete
1-98