Adjusting Red/Green/Blue In Copies (Rgb Adjust) - Sharp MX-C402SC Operation Manual

ADJUSTING RED/GREEN/BLUE IN COPIES (RGB Adjust)

This feature is used to strengthen or weaken any one of the three color components R (red), G (green), or B (blue).
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
Place the original in the automatic document feeder.
1
☞
PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER
After placing the original, specify the original size.
☞
ORIGINAL SIZES
Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the [Color Adjustments] key.
(3) Touch the [RGB Adjust] key.
☞
[Color Adjustments] KEY
(2)
Color Adjustments
RGB Adjust
Only one color can be adjusted.
R(Red)
3
-2
Press the [COLOR START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [COLOR START] key. Repeat until all pages have been scanned
4
and then touch the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key (
R(Red)+
(page 2-30)
(page 2-84)
(1) (3)
OK
Cancel OK
B(Blue)
G(Green)
-1 0 1 2
).
G(Green)+
B(Blue)+
(page 1-36)
Adjust red, green, or blue.
(1) Touch the key of the color that you wish to
adjust: [R (Red)], [G (Green)], or [B (Blue)].
Only one color can be adjusted. (If you adjust one color
and then adjust another color, the adjustment of the first
color is canceled.)
(2) Adjust the selected color.
Touch the [+] key to strengthen the selected color, or
touch the [-] key to weaken the color.
(3) Touch the [OK] key.
You will return to the special modes screen. Touch the
[OK] key to return to the base screen of copy mode.
2-85
COPIER
Contents