Copy Color Modes - Sharp MX-7090N User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES

COPY COLOR MODES

Select the color mode from Auto, Full Color, B/W, 2 Color, and Single Color.
The machine automatically detects whether each original is color or black & white and switches the mode
Auto
appropriately (full color for a color original or black & white for a black & white original).
Full Color The original is copied in full color.
B/W The original is copied in black and white.
The original is copied in two colors by changing a specific color used in the original to another color. If red is
2 Color set to a specific color, reddish parts in an original are extracted, and changed to the specified color to make a
copy.
Single Color* The original is copied in any one color regardless of the colors used in the original.
* Can be set in normal mode.
If any color mode is selected, copying takes place in black and white when you tap the [B/W Start] key.
• To change the default color mode:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Initial Status Settings] → [Color Mode].
• To change the standard to detect Black & White and Color:
In "Settings (administrator)", select [System Settings] → [Common Settings] → [Device Control] → [Detect Standard in
Auto Color Mode].
When the color mode is set to auto in copy mode, the discrimination point for detecting whether originals are color or black
and white can be set to one of 5 levels. When set to [Closer to B/W], the originals are easier to recognize as black and
white. When set to [Closer color], the originals are easier to recognize as color.
1
Original
8½x11
Color Mode
Full Color
CA
Preview
2
Color Mode
Auto Full Color
CA
Preview
• When auto mode is used, there may be some originals for which switching between color and black & white does not
take place correctly. If so, tap the [Color Start] or [B/W Start] key to manually switch between color and black & white.
• When [B/W Start] is selected, the [Color Start] key cannot be tapped.
Detail
Original Exposure Card Shot
Off
Auto
Copies
B/W
Start
B/W 2 Color
Copies
B/W
Start
Tap the [Color Mode] key.
Color
Start
Select the color mode.
After the settings are completed, tap
Check that the specified color mode is selected.
Color
Start
2-20
.