Inserting Insertion Sheets In Between Transparency Films (Transparency Inserts) - Sharp MX-7090N User Manual

COPIER►OTHER FUNCTIONS
INSERTING INSERTION SHEETS IN BETWEEN
TRANSPARENCY FILMS (TRANSPARENCY INSERTS)
When copying on transparency film, the sheets may stick together due to static electricity.
The transparency inserts function can be used to automatically insert a sheet of paper between each sheet of
transparency film, making the sheets easy to handle.
It is also possible to copy on insertion sheets.
When performing 2-sided copying, only "2-Sided→1-Sided" mode can be used.
• The number of copies cannot be selected in this mode.
• Transparency film can be loaded in the bypass tray, tray 4 and large capacity trays.
Load transparency film in the bypass tray, tray 4 or large capacity trays.
1
When loading paper in the bypass tray or large capacity trays, load with the print side up. In tray 4, load with the print
side down.
► LOADING PAPER INTO THE BYPASS TRAY (page 1-81)
► LOADING PAPER IN THE TRAY 3/4 (page 1-67)
► LOADING PAPER IN THE LARGE CAPACITY TRAYS (page 1-76)
Place the original.
2
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-90)
► DOCUMENT GLASS (page 1-92)
3 Tap the [Others] key, and then tap the [Transparency Inserts] key.
B
Inserts
2-126