Sharp MX-7090N User Manual page 727

SYSTEM SETTINGS►SYSTEM SETTINGS
User Name
Enter the user name.
Password
Enter the password.
Change Password
To change the password, set
Connection Test
Tap the [Execute] button to test the connection to the SMTP server.
LDAP Settings
Name
Enter the address book name.
Search Root
Enters the search defaults to search for a specific area of the LDAP directory information tree.
Example: o = ABC, ou = NY, cn = Everyone
Entries must be separated from each other by semicolons or commas.
LDAP Server
Enter the IP address or host name of the LDAP server.
User Name
Enter the account name for LDAP setting.
Password
Enter the password.
Change Password
To change the password, set
Authentication Type
Select the authentication server from the drop-down list.
KDC Server
Enter the IP address or host name of the Kerberos authentication server.
Realm
Enter the Kerberos realm.
Allow selection on operation panel.
Specify whether or not enable the global address to be selected on the operation panel of the machine.
Authenticate a User in Global Address Search
Select whether or not authenticate a user when a global address is searched for.
Enable SSL
If is set, the SSL encryption communication is enabled.
Connection Test
Tap the [Execute] button to test the connection to the LDAP server.
.
.
7-130