Paper Type Registration - Sharp MX-7090N User Manual

SYSTEM SETTINGS►SYSTEM SETTINGS

Paper Type Registration

Store a paper type when the desired paper type does not appear as a selection or when you wish to create a new set of
paper properties.
Up to 9 paper types can be registered.
List name
Type Name
Fixed Paper Side
Disable Duplex
Disable Reverse
Disable Staple
Disable Punch
Disable Fold
The settings that can be selected vary depending on the peripheral devices installed.
Register any name.
The factory default names are "User Type 1" to "User Type 9".
Use this setting when paper with a front and reverse side is used.
Use this setting when paper loaded cannot be used for 2-sided printing.
Use this setting when using paper that cannot be reversed.
Use this setting when paper used cannot be stapled.
Use this setting when paper used cannot be punched.
Use this setting when paper used cannot be punched.
7-113
Description