Autotest Procedure By Using Aurora Communicator - Power One Aurora PVI-10.0-I-OUTD-S-400 Installation And Operating Manual

Photovoltaic inverters

Table of Contents

Available languages

Use and installation manual

(PVI-10.0/12.0-I-OUTD(-S)-400 Rev:1.3)

Autotest procedure by using AURORA Communicator

The Autotest procedure can be carried out by using the AURORA Communicator

software, included in the CD provided.

To carry out autotests, follow the procedure below:

Install the AURORA Communicator software on your PC.

Connect the inverter to the PC by using the RS485/UBS converter

Start-up the AURORA Communicator software

The following will be shown on the start-up screen:

Click on Configuration > Configure Inverter

Table of Contents

Do you have a question about the Aurora PVI-10.0-I-OUTD-S-400 and is the answer not in the manual?