Replacement Of The Memory - Power One Aurora PVI-10.0-I-OUTD-S-400 Installation And Operating Manual

Use and installation manual
(PVI-10.0/12.0-I-OUTD(-S)-400 Rev:1.3)
3.6

Replacement of the memory

WARNING:
connection/disconnection procedure detailed in paragraph 3.4.1.
All historical data relative to the system energy production are stored in this
memory. If the inverter must be replaced, the memory can simply be removed from
the old unit, and reinserted into the new one. By so doing, you can continue to save
present and future daily data on this memory, and avoid losing the data already
stored in it. See Fig. 16.
WARNING:
only.
Before carrying
Fig. 16 - Inverter memory
The memory must be replaced by qualified personnel
out any operation,
39 97
Page of
follow the