Check Base Station Status in Software
5
The BaiCells base stations are designed to be plug-and-play and, therefore, arrive pre-
configured. Before you seal and weatherproof the connections on the base station elements,
you will need to log in either to the client Web GUI or the cloud-based OMC to ensure the base
station status is reported as active.
5.1 Web GUI
From the base station MGMT port, type in http://192.168.1.1, using username admin,
password admin. (Once the application is installed and has a WAN IP address assigned, you
can log in with http://x.x.x.x.)
Go to Status Info as shown in Figure 5-1. If the status is not reported as active, contact BaiCells
support.
Figure 5-1: Web GUI Base Station Status
For additional information concerning the configuration GUI, please refer to the BaiCells
CloudCore Network Administration Guide on the BaiCells website.
35