Table of Contents
Advertisement
Figure 4-14: Align Bayonet
Later in the procedure, you will apply the weatherproof tapes. The completed
4.
connection is shown in Figure 4-15. Weatherproofing is covered in
Figure 4-15: Weatherproofed Ethernet Cable
4.2.4 Connect Power Connector
The AC to DC power adaptor allows you to power the base station using an AC electrical outlet
while supplying the requisite DC power to the base station. On the input side of the adaptor
is the AC power supply, where the voltage is 100V to 277V, 50/60 Hz. The output end of the
power adaptor has a red power cord and a black power cord. The red power cord is +48V, and
the black power cord is 0V. The output voltage is 48V DC. Figure 4-16 illustrates the connection
relationship of the incoming power and the power adaptor.
Figure 4-16: Power Adaptor Input/Output
24
section
6.
Advertisement
Table of Contents
