Table of Contents
Advertisement
Figure 4-6: GPS Antenna Cable and Lightning Arrestor
Later in the procedure, you will apply weatherproofing tapes to the connection point
3.
of the GPS antenna cable, as shown in Figure 4-7. Weatherproofing is covered in
section 6
of this document.
Figure 4-7: Weatherproofed GPS Antenna Cable
4.2.2.2 Attach GPS Antenna to Base Station
Follow the steps below to attach the GPS antenna to the base station.
Prepare the following assembly units for the GPS antenna installation: GPS antenna, feed
1.
cable, GPS mounting bracket 1, and GPS mounting bracket 2.
Fit the GPS mounting bracket 2 on the base station using M4 screws. Refer to Figure 4-8.
2.
Figure 4-8: GPS Mounting Bracket 2
21
Advertisement
Table of Contents
