Fit the GPS mounting bracket 1 on the GPS mounting bracket 2 using an M4 screw, turning
3.
mounting bracket 1 to the required angle so as not to obstruct the pole or other structure
to which the GPS and base station will be attached. Refer to Figure 4-9.
Figure 4-9: GPS Mounting Bracket 1
Fit the GPS antenna on the GPS mounting bracket 1 with an M4 screw so that it is vertically
4.
plumb. Refer to Figure 4-10. The completed installation of the GPS antenna on the base
station is shown in Figure 4-11.
Figure 4-10: GPS Antenna on Mounting Bracket 1
Figure 4-11: Completed GPS Antenna Installation on Base Station
22