Table of Contents
Advertisement
4.2 Staging
You will assemble several components while the base station and antenna are still on the
ground. This section covers the staging activities that prepare the base station and antenna
for installing at the destined tower, roof, or other structure.
4.2.1 Attach Mounting Brackets and Handle
Begin the installation by connecting the mounting brackets and handle to the base station unit,
as explained below.
1.
Use the M6*12 socket head screw to fix the brackets on both sides of the base station
unit, as shown in Figure 4-2.
Figure 4-2: Install Mounting Brackets
2.
Looking at the front of the base station, use the M6*12 socket head screw to fix the
handle on the right side of the base station unit, as shown in Figure 4-3.
Figure 4-3: Install Handle
19
Advertisement
Table of Contents
