Install Gps Antenna On Base Station; Figure 4-4: Base Station With Mounting Brackets And Handle; Figure 4-5: Ground Wire - Gps Lightning Arrestor - Baicells Nova 1W Installation Manual

Table of Contents

Advertisement

Figure 4-4 shows the base station with the mounting brackets and handle attached.

Figure 4-4: Base Station with Mounting Brackets and Handle

4.2.2 Install GPS Antenna on Base Station

The GPS antenna is installed on the top of the base station. This section explains how to install
the GPS lightning arrestor and how to attach the GPS antenna to the base station.
4.2.2.1 GPS Lightning Arrestor
The GPS antenna lightning arrestor must be installed prior to connecting the GPS antenna to
the base station. Follow the steps below to install the GPS lightning arrestor. Although
weatherproofing instructions are included, weatherproofing should not be applied until later
in the installation procedure.
Connect the ground wire of the GPS lightning arrestor to the lightning arrestor, and
1.
fasten it as shown in Figure 4-5.

Figure 4-5: Ground Wire - GPS Lightning Arrestor

Connect one end of the GPS antenna cable to the GPS lightning arrestor, as shown in
2.
Figure 4-6.
20

Advertisement

Table of Contents
loading

Table of Contents