Figure 4-28: Example - Completed Omnidirectional Antenna + Base Station Installation
4.3.2.3 Install Directional Antenna on Tower or Pole
Following are guidelines for installing a directional antenna at the cell site.
First, assemble the antenna and the upper and lower racks, as shown in Figure 4-29.
•
Follow standard transport procedures to hoist the antenna to the target location.
•
Using expansion screws, fix the support pole vertically to the ground (or concrete
•
pillars on a rooftop), and fasten it with steel wires.
Mount the antenna assembly onto the pole using the installation racks.
•
Figure 4-29: Assemble Directional Antenna
33