4.5 Power on to Check LEDs
Power on the base station and check that the LED indicators are lighting as expected, per
Figure 4-6. Refer to the LED descriptions in
Figure 4-6: LEDs
4.6 Check Base Station Status in Software
The Baicells base stations are designed to be plug-and-play and, therefore, arrive pre-
configured. You will need to log in either to the local or remote base station GUI (section 4.6.1)
or the cloud-based OMC (section 4.6.2) to ensure the base station status is reported as active.
4.6.1 Base Station GUI
Go to http://192.168.1.1, using username admin, password admin. Go to Status Info as shown
in Figure 4-7. If the status is not reported as active, contact
Figure 4-7: Web GUI Base Station Status
Table
3-3.
Baicells
17
support.