Table of Contents
Advertisement
1.4
Technical Specification
1.4.1 Hardware Specification
Item
LTE Mode
LTE Bands
Channel Bandwidth* 5/10/15/20 MHz
Output Power
Receive Sensitivity
Synchronization
Backhaul
MIMO
Dimension
Installation Type
Antenna
Overall Power
Power Supply
Weight
* The model pBS2120 only support 10MHz/20MHz.
Note: The test method of receiving sensitivity is proposed by the 3GPP TS 36.104, which is based on
5MHz bandwidth, FRC A1-3 in Annex A.1 (QPSK, R=1/3, 25RB) standard.
1.4.2 Software Specification
Item
LTE Standard
Peak Rate
User Capacity
QoS Control
LTE TDD
Band38/39/40/41/42/43/48
24±2dBm/Ant
-100 dBm @band42/43/48
-101 dBm @band38/39/40/41
GPS
1 x RJ-45 Ethernet interface (1 GE)
DL: 2 x 2
248mm (H) x 248mm (W) x 80mm (D)
Pole, wall
14.5dBi, internal high gain antenna
Horizontal beam width 65° , vertical beam width 20°
Polarization mode: ± 45°
< 20 W
PoE+, IEEE802.3at standard
About 2.0 kg
3GPP Release 9
20 MHz:
SA0: DL 50 Mbps, UL 42 Mbps
SA1: DL 80 Mbps, UL 28 Mbps
SA2: DL 110 Mbps, UL 14 Mbps
10MHz:
SA0: DL 25 Mbps, UL 21 Mbps
SA1: DL 40 Mbps, UL 14 Mbps
SA2: DL 55 Mbps, UL 7 Mbps
96 concurrent users
3GPP standard QCI
3
Description
Description
Advertisement
Table of Contents
