Table of Contents
Advertisement
MN001824A01-AT
Chapter 5: General Radio Operation
d. Press the Menu Select button directly below Sel to confirm the selected channel.
●
Select a channel using the radio menu Channel Up or Channel Down:
a.
or
to ChUp or ChDn.
b. Press the Menu Select button directly below ChUp or ChDn.
Positions of ChUp and ChDn on the display may differ each time you release the Menu Select
button. Read carefully before you press.
5.3
Selecting a Channel by using Channel Search
Button
This feature allows you to do a quick search for a specific channel in your radio by keying in the alias of the
channel.
Procedure:
1. Perform one of the following actions:
●
Press the preprogrammed Channel Search button.
●
or
to CSrh and press the Menu Select button directly below CSrh.
A blinking cursor appears on the Channel Search screen.
2. Use the keypad to type or edit your channel name.
3. To initiate searching, press the Menu Select button directly below CSrh once the entry is done.
To exit this procedure, press the Menu Select button directly below Cncl .
Result: One of the following scenarios occurs:
●
The display shows Searching. Once found, the display shows the matched channel name and the radio
changes its transmission to the selected channel.
●
If the radio is triggered to search for an empty entry, the display shows Invalid entry. Repeat
to search again.
●
If the entry does not match, the display shows Channel name not found.Repeat
again; or press
or the Menu Select button directly below Exit to exit.
5.4
Mode Select Feature
The Mode Select feature allows you to save the current zone and channel on your radio to one of the Mode
Select feature menus (MS01–MS05) on a programmable side button (MS01–MS13).
When programmed, pressing the button changes the transmission to the saved zone and channel. When
the Preconfigurable Preset Zone and Channel field is enabled, pressing and holding the preferred Mode
Select menu saves the current zone and channel to one of the Mode Select menus. The radio displays MS0x
is programmed.
NOTE: Your radio must be programmed for you to use this feature.
38
step 2
step 2
to search
Advertisement
Table of Contents
