Mode Select Feature; Saving A Zone And A Channel To A Softkey; Saving A Zone And A Channel To A Button - Motorola APX 8000H User Manual

Hide thumbs Also See for APX 8000H:
Table of Contents

Advertisement

a.
or to Chan.
b. Press the Menu Select button directly below Chan .
c.
or
to the required channel.
d. Press the Menu Select button directly below Sel to confirm the selected channel.
Select a channel using the radio menu Channel Up or Channel Down:
a.
or
to ChUp or ChDn.
b. Press the Menu Select button directly below ChUp or ChDn.
Positions of ChUp and ChDn on the display may differ each time you release the Menu Select
button. Read carefully before you press.
5.3

Mode Select Feature

The Mode Select feature allows you to save the current zone and channel on your radio to one of the Mode
Select feature menus (MS01–MS05) on a programmable side button (MS01–MS13).
When programmed, pressing the button changes the transmission to the saved zone and channel. When
the Preconfigurable Preset Zone and Channel field is enabled, pressing and holding the preferred Mode
Select menu saves the current zone and channel to one of the Mode Select menus. The radio displays MS0x
is programmed.
NOTE:
Saving the current zone and channel of your radio to a keypad button is only applicable to Model 3.5.
Your radio must be programmed for you to use this feature.
5.3.1

Saving a Zone and a Channel to a Softkey

Five softkeys are available for you to save the frequently used zone and channel.
Prerequisites: Enable the Preconfigurable Preset Zone and Channel field.
Procedure:
1. Toggle from your current zone and channel to the required zone and channel.
2.
or to MS1, MS2 ... or MS5.
3. Press and hold the Menu Select button directly below one of the softkeys (MS1–MS5).
Result:
You hear a short, medium-pitched tone when the zone and channel is saved.
If the Preconfigurable Preset Zone and Channel field is disabled, a negative tone sounds.
NOTE: Short press of the programmed softkey changes your current transmission to the zone and
channel programmed in this softkey.
5.3.2

Saving a Zone and a Channel to a Button

You can save the frequently used zone and channel to the programmable buttons.
Prerequisites: Enable the Preconfigurable Preset Zone and Channel field.
MN004476A01-AN
Chapter 5: General Radio Operation
39

Advertisement

Table of Contents
loading

Table of Contents