Table of Contents
Advertisement
If successful, the display shows Pairing in progress, <Device Friendly Name>
paired, or Connecting in progress... followed by <Device Friendly Name>
connected and returns to the Bluetooth feature screen.
If unsuccessful, one of the following scenarios occurs:
•
If the PIN numbers are different, the display shows <Device Friendly Name> pair
failed.
•
If the connection fails, the display shows <Device Friendly Name> connect failed.
The display returns to the Available Dev screen.
For Bluetooth devices, the display shows BT.
For Wireless-Pair devices, the display shows WP.
14.3.4
Turning Bluetooth Audio On or Off
NOTE:
Bluetooth audio routing can be configured in the Customer Programming Software (CPS) to
route the audio to the radio internal speaker. The audio routes to the radio speaker if the
radio Remote Speaker Microphone (RSM) is not connected. For more information, contact your
system administrator.
For Bluetooth (BT) Push-to-Talk (PTT) press, the active microphone can be configured in CPS
to transmit from either the RSM, the radio microphone, or the BT headset. If the configured
device is not available, audio transmission reverts to BT headset.
Procedure:
1 Press the BT menu item.
2 Select Bluetooth spkr.
3 Perform one of the following actions:
•
To turn on Bluetooth audio, press On.
•
To turn off Bluetooth audio, press Off.
4 To return to the Home screen, press Exit.
14.3.5
Adjusting the Volume of the Radio from the Bluetooth Audio Device
Prerequisites: Ensure that the Bluetooth audio device is connected to the radio.
Your radio can control the volume of OCW and other Bluetooth enabled audio devices that are capable
of remote volume control.
Procedure:
At the Bluetooth audio device, adjust the volume up or down.
Your radio shows the following indications:
•
A tone sounds.
•
The display shows Volume XX.
68012006035-FA
Chapter 14 : Connectivity
79
Advertisement
Table of Contents
