Turning On The Bluetooth Audio; Turning Off The Bluetooth Audio; Adjusting The Volume Of The Radio From Bluetooth Audio Device; Clearing All Bluetooth Devices Information - Motorola APX 8000HXE 1.5 User Manual

Table of Contents

Advertisement

6.14.5

Turning On the Bluetooth Audio

Procedure:
Turning on the Bluetooth audio using the preprogrammed button:
a. Press the preprogrammed Bluetooth Audio Reroute button to route the audio from the
radio to the headset.
You hear a short, medium-pitched tone. The display shows HDSET ON.
BT audio routing can be configured in CPS to route the audio to RSM or radio's internal speaker.
The audio routes to the radio's speaker if RSM is not connected. Check with your dealer or
system administrator for more information on the programming of this feature.
NOTICE: For BT PTT press, the active microphone can be configured in CPS to transmit
from either the RSM, the radio microphone, or the BT headset. If the configured device
is not available, audio transmission reverts to BT headset.
6.14.6

Turning Off the Bluetooth Audio

Procedure:
Turning off the Bluetooth audio using the preprogrammed button:
a. Press the preprogrammed Bluetooth Audio Reroute button to route the audio from the
headset to the radio.
You hear a short, medium-pitched tone. The display shows SPKR ON.
6.14.7

Adjusting the Volume of the Radio from Bluetooth Audio Device

Prerequisites: Ensure that the Bluetooth audio device is connected to the radio.
When and where to use:
Your radio can only control the volume of MCW and OCW Bluetooth enabled audio device. If the radio
is paired with other Bluetooth enabled audio device, its volume is independent from the APX radio. In
this case, the volume is only adjustable on the device.
Procedure:
Adjust volume up/down on the Bluetooth audio device.
The radio display shows VOL XX and sounds a short, medium-pitched tone.
6.14.8

Clearing All Bluetooth Devices Information

Procedure:
Clearing all Bluetooth devices information using the preprogrammed Bluetooth On/Off button:
a. Long press the preprogrammed Bluetooth On/Off button.
You hear a short, medium-pitched tone. The display shows PLS WAIT to indicate clearing is
in progress.
MN006727A01-AA
Advanced Features
65

Advertisement

Table of Contents
loading

Table of Contents