Engraving System Variables - HEIDENHAIN TNC 620 User Manual

Cycles: Special Functions | ENGRAVING (Cycle 225, DIN/ISO: G225)

Engraving system variables

In addition to the standard characters, you can engrave the
contents of certain system variables. Enter % before the system
variable.
You can also engrave the current date or time. Enter %time<x>.
<x> defines the format, e.g. 08 for DD.MM.YYYY. (Identical to the
SYSSTR ID321 function)
Keep in mind that you must enter a leading 0 when
entering the date formats 1 to 9, e.g. time08.
Character
DD.MM.YYYY hh:mm:ss
D.MM.YYYY h:mm:ss
D.MM.YYYY h:mm
D.MM.YY h:mm
YYYY-MM-DD hh:mm:ss
YYYY-MM-DD hh:mm
YYYY-MM-DD h:mm
YY-MM-DD h:mm
DD.MM.YYYY
D.MM.YYYY
D.MM.YY
YYYY-MM-DD
YY-MM-DD
hh:mm:ss
h:mm:ss
h:mm
HEIDENHAIN | TNC 620 | User's manual for cycle programming | 10/2017
Input
%time00
%time01
%time02
%time03
%time04
%time05
%time06
%time07
%time08
%time09
%time10
%time11
%time12
%time13
%time14
%time15
11
321