Hiding Single Points From The Machining Process; Selecting A Point Table In The Program - HEIDENHAIN TNC 620 User Manual

Hide thumbs Also See for TNC 620:

Table of Contents

Hiding single points from the machining process

In the FADE column of the point table you can specify if the defined

point is to be hidden during the machining process.

In the table, select the point to be hidden

Select the FADE column

Activate hiding, or

Deactivate hiding

In the Programming mode of operation, select the program for

which you want to activate the point table:

Press the PGM CALL key to call the function for

selecting the point table

Press the POINT TABLE soft key

Enter the name of the point table and confirm your entry with the

END key. If the point table is not stored in the same directory as the

NC program, you must enter the complete path.

Example NC block

7 SEL PATTERN "TNC:\DIRKT5\NUST35.PNT"

Using Fixed Cycles | Point tables

HEIDENHAIN | TNC 620 | User's manual for cycle programming | 10/2017