GARP Timer
Parameter
Description
Specifies the maximum number of milliseconds the interface waits before
Join Time
sending VLAN advertisements.
Specifies the number of milliseconds an interface waits after receiving a
Leave Time
leave message before the interface leaves the VLAN specified in the
message.
Specifies the interval in milliseconds at which Leave All messages are sent
Leaveall Time
on interfaces. Leave All messages help to maintain current GVRP VLAN
membership information in the network.
6.3.4.
MAC-based VLAN
6.3.4.1. Introduction
The MAC base VLAN allows users to create VLAN with MAC address. The MAC address can
be the leading three or more bytes of the MAC address.
For example, 00:01:02 or 00:03:04:05 or 00:01:02:03:04:05.
When the Switch receives packets, it will compare MAC-based VLAN configures. If the SA is
82
Need help?
Do you have a question about the AW-IHT-1270 and is the answer not in the manual?
Questions and answers