Vivotek AW-FCT-050A-250 Quick Installation Manual

INTRODUCTION
Model Power Source
AW-FCT-050A-250 100~240VAC and
56VDC
PACKAGE CONTENTS
* 1x EPoC RX Switch
* 2x rack mount ears
IMPORTANT:
1. Install the EPoC RX switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and
dust.
2. Make sure the ventilation openings on the switch are not blocked.
3. Use CAT5e or CAT6 UTP/STP cables and RG6 coaxial cables.
4. Please avoid using low quality cables, which will seriously limit the cabling distance and power delivery.
5. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 250W.
CONNECTION
4 AT/AF Cameras
AW-FCT-050A-250
AW-FCT-
8 AF Cameras
AW-FCT-050A-250
AW-FCT-
Grounding
AW-FCT-050A-250 4 ports Unmanaged EPoC Switch
Quick Installation Guide
Description
EPoC RX Switch, 4x BNC, 1x GbE RJ45, 100-240VAC Input, 0ºC~50ºC
* 1x Quick Installation Guide
* 1x power cord (type by the shipped-to area)
RG6 100m~1.2km
RG6 100m~500m
Grounding screw for 56VDC input
AP-FEX-0105-T
AP-FEX-0150-T
AP-FEX-0105-T
AP-FEX-0150-T
AP- FEX-0200-T
AP- FEX-0250-T
AP-FEX-0200-T
AP-FEX-0250-T
56VDC INPUT
.
.
.
.
.
.
Coax
Ethernet
100~240V AC