Cli Configuration - Vivotek AW-IHT-1270 User Manual

6.13.1.2. CLI Configuration

Node Command
show spanning-tree
enable
active
show spanning-tree
enable
blockedports
show spanning-tree
enable
port detail PORT_ID
show spanning-tree
enable
statistics PORT_ID
show spanning-tree
enable
summary
clear spanning-tree
enable
counters
clear spanning-tree
enable
counters PORT_ID
spanning-tree (disable
configure
| enable)
spanning-tree
configure
algorithm-timer
forward-time TIME
max-age TIME hello-
time TIME
no spanning-tree
configure
algorithm-timer
spanning-tree
configure
forward-time <4-30>
no spanning-tree
configure
forward-time
spanning-tree hello-
configure
time <1-10>
no spanning-tree
configure
hello-time
spanning-tree max-
configure
age <6-40>
no spanning-tree
configure
max-age
spanning-tree mode
configure
(rstp|stp)
spanning-tree
configure
pathcost method
(short|long)
spanning-tree priority
configure
<0-61440>
no spanning-tree
configure
priority
This command displays the spanning tree information
for only active port(s)
This command displays the spanning tree information
for only blocked port(s)
This command displays the spanning tree information
for the interface port.
This command displays the spanning tree information
for the interface port.
This command displays the summary of port states and
configurations
This command clears spanning-tree statistics for all
ports.
This command clears spanning-tree statistics for a
specific port.
This command disables / enables the spanning tree
function for the system.
This command configures the bridge times (forward-
delay,max-age,hello-time).
This command configures the default values for
forward-time & max-age & hello-time.
This command configures the bridge forward delay time
(sec).
This command configures the default values for
forward-time.
This command configures the bridge hello time(sec).
This command configures the default values for hello-
time.
This command configures the bridge message max-age
time(sec).
This command configures the default values for max-
age time.
This command configures the spanning mode.
This command configures the pathcost method.
This command configures the priority for the system.
This command configures the default values for the
system priority.
141
Description