Vivotek AW-IHT-1270 User Manual page 183

destination mac host
acl
MACADDR
destination mac
acl
MACADDR
MACADDR
destination mac
acl
MACADDR
MACADDR
no destination mac
acl
ethertype STRING
acl
no ethertype
acl
source mac host
acl
MACADDR
source mac
acl
MACADDR
MACADDR
no source mac
acl
source ip host
acl
IPADDR
source ip IPADDR
acl
IPMASK
no source ip
acl
destination ip host
acl
IPADDR
destination ip
acl
IPADDR IPMASK
no destination ip
acl
l4-source-port
acl
IPADDR
no l4-source-port
acl
IPADDR
L4-destination-port
acl
PORT
no l4-destination-port
acl
vlan VLANID
acl
no vlan
acl
source interface
acl
profile.
This command configures the destination MAC and
mask for the profile.
This command configures the destination MAC and
mask for the profile.
This command configures the destination MAC and
mask for the profile. The second MACADDR parameter
is the mask for the profile.
This command removes the destination MAC from the
profile.
This command configures the ether type for the profile.
Where the STRING is a hex-decimal value. e.g.: 08AA.
This command removes the limitation of the ether type
from the profile.
This command configures the source MAC and mask
for the profile.
This command configures the source AMC and mask
for the profile.
This command removes the source MAC and mask
from the profile.
This command configures the source IP address for the
profile.
This command configures the source IP address and
mask for the profile.
This command removes the source IP address from the
profile.
This command configures a specific destination IP
address for the profile.
This command configures the destination IP address and
mask for the profile.
This command removes the destination IP address from
the profile.
This command configures UDP/TCP source port for the
profile.
This command removes the UDP/TCP source port from
the profile.
This command configures the UDP/TCP destination
port for the profile.
This command removes the UDP/TCP destination port
from the profile.
This command configures the VLAN for the profile.
This command removes the limitation of the VLAN
from the profile.
This command configures the source interface for the
175