Vivotek AW-IHT-1271 User Manual
  1. Manuals
  2. Brands
  3. Vivotek Manuals
  4. Switch
  5. AW-IHT-1271
  6. User manual
Vivotek AW-IHT-1271 User Manual

Vivotek AW-IHT-1271 User Manual

Industrial vivocam l2 plusmanaged poe switch 8xge poe plus 4xge sfp
Hide thumbs Also See for AW-IHT-1271:
Table of Contents

Advertisement

Quick Links

Download this manual
M
G
A N A G E M E N T
U I D E
AW-IHT-1271
CLI User Guide
Industrial VivoCam L2+ Managed PoE Switch
8xGE PoE + 4xGE SFP
Release A1

Advertisement

Table of Contents
loading

Related Manuals for Vivotek AW-IHT-1271

Summary of Contents for Vivotek AW-IHT-1271

  • Page 1 A N A G E M E N T U I D E AW-IHT-1271 CLI User Guide Industrial VivoCam L2+ Managed PoE Switch 8xGE PoE + 4xGE SFP Release A1...
  • Page 2 BOUT UIDE This guide gives specific information on how to operate CLI URPOSE to manage this switch. The guide is intended for use by network administrators who UDIENCE are responsible for operating and maintaining network equipment; consequently, it assumes a basic working knowledge of general switch functions, the RS-232 Console , Internet Protocol (IP), and Telnet Protocol.

  • Page 3: Revision History

    Revision History Release Date Revision Initial Release 2018/03/30...

  • Page 4: Table Of Contents

    ONTENTS ABOUT THIS GUIDE ..............................II REVISION HISTORY ............................III CONTENTS ................................1 CLI MANAGEMENT ............................3 1-1 L ..................................4 OGIN 1-2 C CLI ............................... 5 OMMANDS OF 1-3 G CLI ............................6 LOBAL OMMANDS OF CLEAR OF CLI .............................. 9 CONFIGURE COMMANDS OF CLI ........................10 COPY COMMANDS OF CLI ..........................
  • Page 5 PTP OF CLI ..............................163 RELOAD OF CLI ............................... 165 SEND OF CLI ..............................166 SHOW OF CLI ..............................167 TERMINAL OF CLI ............................238 TRACEROUTE OF CLI ............................. 240 VERIPHY OF CLI ............................289...

  • Page 6: Cli Management

    CLI Management The following description is the brief of the network connection. -- Locate the correct DB-9 (RS-232) cable with female DB-9 connector. RS-232 cable is used for connecting a terminal or termial emulator to the Managed Switch’s RJ45 port to access the command-line interface. -- Attach the RJ45 serial port on the switch’s front panel which used to connect to the switch for console configuration -- Attach the other end of the DB-9 cable to an ASCII terminal emulator or PC Com-1, 2 port.

  • Page 7: Login

    Managed Switch. If log as not the administrator, the prompt will be shown as “<sys_name>>”, it means you behave as a guest and are only allowed for setting the system under the administrator. Each CLI command has its privilege Username: admin Password: admin AW-IHT-1271#...

  • Page 8: C Ommands Of Cli

    1-2 Commands of CLI The CLI is divided into serveral modes. If a user has enouth privilege to run a particular command, the user has to run the command in the correct mode. To see the commands of the mode, please input “?” after the system prompt, then all commands will be listed in the screen.

  • Page 9: G Lobal C Ommands Of Cli

    Configure terminal exit config-interfcae Interface <port-type> <port-type-list> exit config-vlan Interface vlan <vlan_list> exit 1-3 Global Commands of CLI AW-IHT-1271# ? clear Reset functions configure Enter configuration mode copy Copy from source to destination delete Delete one file in flash: file system...
  • Page 10 VeriPHY keyword Exit Exit from EXEC mode. Syntax: exit Parameter: None. Example: AW-IHT-1271(config)# exit AW-IHT-1271# Help Description of the interactive help system. Syntax: help Parameter: None. Example: AW-IHT-1271# help Help may be requested at any point in a command by entering a question mark '?'.
  • Page 11 Exit from EXEC mode. Syntax: logout Parameter: none Example: AW-IHT-1271# logout press ENTER to get started Go back to EXEC mode. Syntax: Example: (config)# end AW-IHT-1271#...

  • Page 12: Clear Of Cli

    CLEAR of CLI Table : CLEAR Commands Command Function access Access management access-list Access list dot1x IEEE Standard for port-based Network Access Control Ethernet Protection Switching. erps Ethernet Ring Protection Switching Ethernet Virtual Connections Interface Internet Protocol config commands ipv6 IPv6 configuration commands lacp Clear LACP statistics...
  • Page 13 Syntax Clear dot1x statistics Clear dot1x statistics interface GigabitEthernet < PORT_TYPE_LIST> Parameter statistics Clears the statistics counters interface Interface GigabitEthernet 1 Gigabit Ethernet Port PORT_TYPE_LIST Port list in 1/1-12 for Gigabitethernet EXAMPLE AW-IHT-1271# clear dot1x statistics interface GigabitEthernet 1/1-12 AW-IHT-1271#...
  • Page 14 1-64 command [ ( clear | force | manual ) ( port0 | port1 ) ] Parameter 1-64 ERPS group number command Administrative Command clear Clear command force Force command manual Manual command port0 ERPS Port 0 interface port1 ERPS Port 1 interface EXAMPLE AW-IHT-1271# clear erps 1 command clear port0 AW-IHT-1271# Ethernet Virtual Connections...
  • Page 15 1 Gigabit Ethernet Port <port_type_list> Port list for all port types <port_type_list> Port list in 1/1-12 EXAMPLE AW-IHT-1271# clear evc statistics AW-IHT-1271# Interface Internet Protocol config commands Syntax clear ip arp clear ip dhcp detailed statistics { server | client | snooping | relay | helper | all } [ interface ( <port_type>...
  • Page 16 AW-IHT-1271# clear ip dhcp server statistics AW-IHT-1271# Clear ip dhcp snooping statistics interface GigabitEthernet 1/1-12 AW-IHT-1271# clear ip igmp snooping vlan 1 statistics AW-IHT-1271# clear ip statistics system interface AW-IHT-1271# clear ip statistics system interface vlan 1 icmp icmp-msg 2 ipv6 IPv6 configuration commands.
  • Page 17 IPv6 system traffic < 0~255> ICMP message type ranges from 0 to 255 EXAMPLE AW-IHT-1271# clear ipv6 mld snooping vlan 3 statistics AW-IHT-1271# clear ipv6 neighbors AW-IHT-1271# Clear ipv6 statistics system icmp icmp-msg 2 lacp Clear LACP statistics Syntax...
  • Page 18 AW-IHT-1271# clear lldp statistics | begin LINE AW-IHT-1271# link-oam Clear Link OAM statistics Syntax clear link-oam statistics clear link-oam statistics interface ( * | GigabitEthernet ) <port_type_list> Parameter statistics Clear Rx/Tx counters interface Clear Link OAM statistic on a specific interface or all interfaces.
  • Page 19 Clear G.8113.2 BFD CC/CV statistics counters. Clear DM measuring information. Clear LM measuring information. Clear TST measuring information. EXAMPLE AW-IHT-1271# clear mep 1 dm AW-IHT-1271# Multicast VLAN Registration configuration. Syntax clear mvr [ vlan <v_vlan_list> | name <mvr_name> ] statistics...

  • Page 20: Port_Type_List

    EXAMPLE AW-IHT-1271# clear mvr vlan 25 statistics AW-IHT-1271# Syntax clear ptp <0-3> servo Parameter <0-3> Servo EXAMPLE AW-IHT-1271# clear ptp 1 servo AW-IHT-1271# sflow Statistics flow. Syntax clear sflow statistics { receiver [ <receiver_index_list> ] | samplers [ interface [ <samplers_list> ] ( <port_type>...
  • Page 21 STP statistics interface Choose port <port_type> GigabitEthernet <port_type_list> Port list in 1/1-12 for Gigabitethernet EXAMPLE AW-IHT-1271# clear spanning-tree detected-protocols interface GigabitEthernet 1/1-12 statistics Clear statistics for a given interface Syntax clear statistics interface <port_type> <port_type_list> clear statistics <port_type> <port_type_list>...

  • Page 23: Trap Event Severity Level

    CONFIGURE Commands of CLI Table : CONFIGURE Commands Command Function terminal Configure from the terminal Authentication, Authorization and Accounting access Access management access-list Access list aggregation Aggregation mode banner Define a login banner clock Configure time-of-day clock default Set a command to its defaults Enable DMS Maste To run exec commands in config mode dot1x...
  • Page 24 help Description of the interactive help system hostname Set system's network name interface Select an interface to configure Internet Protocol ipmc IPv4/IPv6 multicast configuration ipv6 IPv6 configuration commands lacp LACP settings line Configure a terminal line lldp LLDP configurations. logging Syslog loop-protect Loop protection configuration...

  • Page 25: Syntax

    Enable UDLD in the aggressive or normal mode and to set the configurable message timer on all fiber-optic ports. upnp Set UPnP's configurations username Establish User Name Authentication vlan VLAN commands voice Voice appliance attributes terminal Configure from the terminal. Syntax configure terminal EXAMPLE AW-IHT-1271# configure terminal AW-IHT-1271(config)#...
  • Page 26 Use local database for authentication radius Use RADIUS for authentication tacacs Use TACACS+ for authentication EXAMPLE AW-IHT-1271(config)# aaa authentication login http radius AW-IHT-1271(config)# access Access management. SYNTAX access management access management <access_id> <access_vid> <start_addr> [ to <end_addr> ] { [ web ] [ snmp ] [ telnet ] | all }...
  • Page 27 Start IPv6 address All services snmp SNMP service telnet TELNET/SSH service End address of the range Web service EXAMPLE AW-IHT-1271(config)# access management 10 3 192.168.1.1 all AW-IHT-1271(config)# access-list Table : configure – access-list Commands Command Function Access list entry rate-limiter Rate limiter Access list entry.
  • Page 28 access-list ace{ update<1-256> | <1-256> } [ ingress] [ ingress interface { <port_type> <port_type_id> | <port_type> <port_type_list> } | any } ] access-list ace{ update<1-256> | <1-256> } [ logging [ disable ] ] access-list ace{ update<1-256> | <1-256> } [ lookup [ disable ] ] access-list ace{ update<1-256>...
  • Page 29 shutdown Shutdown incoming port tag-priority Tag priority VID field deny Deny filter Filter permit Permit Don't-care the type of destination MAC address broadcast Broadcast destination MAC address multicast Multicast destination MAC address unicast Unicast destination MAC address Don't-care the frame type Frame type of ARP etype Frame type of etype...
  • Page 30 The value of policy bitmask <1-4095> The value of VID field <0-7> The value of tag priority EXAMPLE AW-IHT-1271(config)# access-list ace 10 action deny AW-IHT-1271(config)# rate-limiter Rate limiter. SYNTAX access-list rate-limiter [ <1~16> ] { pps <0-3276700> | 100kbps <0-10000> }...
  • Page 31 IP address affects the distribution port IP port affects the distribution smac Source MAC affects the distribution EXAMPLE AW-IHT-1271(config)# aggregation mode ip port dmac smac AW-IHT-1271(config)# banner Define a login banner SYNTAX banner [ motd ] <banner> banner exec <banner>...
  • Page 32 Set EXEC process creation banner login Set login banner motd Set Message of the Day banner EXAMPLE AW-IHT-1271(config)# banner exec LINE Enter TEXT message. End with the character 'L'. AW-IHT-1271(config)# clock Configure time-of-day clock. SYNTAX clock set <icliDate> <icliTime>...
  • Page 33 Offset to add in minutes <1-5> Week number to start <1-7> Weekday to start <1-12> Month to start EXAMPLE AW-IHT-1271(config)# clock set 2016/09/30 10:22:03 2016-09-30T10:22:03+00:00 AW-IHT-1271(config)# do show clock System Time : 2016-09-30T10:22:48+00:00 default Set a command to its defaults SYNTAX default access-list rate-limiter [ <rate_limiter_list>...
  • Page 34 DMS mode is disabled enabled DMS mode is enabled high-priority DMS mode is high priority EXAMPLE AW-IHT-1271(config)# dms mode high-priority AW-IHT-1271(config)# To run exec commands in config mode.? SYNTAX do < LINE >{[< LINE >]} Parameter <LINE> Exec Command...
  • Page 35 AW-IHT-1271(config)# do show vlan VLAN Name Ports -------------------------------------------------------------------------------- -------------------- default GigabitEthernet 1/1, GigabitEthernet 1/2, GigabitEthernet 1/3, GigabitEthernet 1/4, GigabitEthernet 1/5 AW-IHT-1271(config)# dot1x IEEE Standard for port-based Network Access Control. SYNTAX dot1x authentication timer inactivity <v_10_to_100000> dot1x authentication timer re-authenticate <v_1_to_3600>...
  • Page 36 max-reauth-req Guest VLAN ID used when entering the Guest VLAN. re-authentication Set Re-authentication state system-auth-control Set the global NAS state timeout timeout timer timer inactivity Time in seconds between check for activity on successfully authenticated MAC addresses. re-authenticate The period between re-authentication attempts in seconds <10-1000000>...
  • Page 37 EAPOL retransmissions. <10-1000000> seconds <1-65535> seconds EXAMPLE AW-IHT-1271(config)# dot1x authentication timer inactivity 1000 AW-IHT-1271(config)# dot1x feature guest-vlan radius-qos radius-vlan AW-IHT-1271(config)# dot1x guest-vlan 33 AW-IHT-1271(config)# dot1x max-reauth-req 3 AW-IHT-1271(config)# dot1x re-authentication AW-IHT-1271(config)# dot1x system-auth-control AW-IHT-1271(config)# dot1x timeout quiet-period 3000 enable Modify enable password parameters.
  • Page 38 AW-IHT-1271(config)# enable password level 10 999 AW-IHT-1271(config)# Ethernet Protection Switching. SYNTAX eps 1 1plus1 [ bidirectional | unidirectional ] eps 1 1plus1 unidirectional aps eps 1 command [ exercise | forced | freeze | lockout | lockoutlocal | manualp | manual ] eps 1 domain port architecture [ 1for1 | 1plus1 ] work-flow [ GigabitEthernet | <uint>...
  • Page 39 EPS 1+1 unidirectional with APS protection type. exercise Exercise of the protocol - not traffic effecting. This is only allowed in case of 'Bidirectional' protection type forced Force switch normal traffic to protection. freeze Local Freeze of EPS. lockout Lockout of protection. lockoutlocal Local lockout of EPS.
  • Page 40 WTR is 9 min. wtr-value WTR as value. <uint> The WTR value in seconds. Range is 1 to 720 seconds. EXAMPLE AW-IHT-1271(config)# eps 1 1plus1 bidirectional AW-IHT-1271(config)# AW-IHT-1271(config)# eps 1 command manualw AW-IHT-1271(config)# AW-IHT-1271(config)# eps 1 revertive 10m AW-IHT-1271(config)# erps...
  • Page 41 erps 1-64 major port0 interface GigabitEthernet <port_type_id> port1 interface GigabitEthernet <port_type_id> interconnect erps 1-64 mep port0 sf 1-100 aps 1-100 port1 sf 1-100 aps 1-100 erps 1-64 revertive 1-12 erps 1-64 rpl [ neighbor | owner ] [ port0 | port1 ] erps 1-64 sub port0 interface GigabitEthernet <port_type_id>...
  • Page 42 0-10000 Hold-off time in ms port0 ERPS Port 0 interface interface Ethernet interface GigabitEthernet 1 Gigabit Ethernet Port <port_type_id> Port ID in 1/1-12 port1 ERPS Port 1 interface interconnect Major ring is interconnected Signal Fail 1-100 Index of Port 0 SignalFail MEP Automatic Protection Switching 1-12 Wait-to-restore time in minutes...
  • Page 43 AW-IHT-1271(config)# AW-IHT-1271(config)# erps 1 major port0 interface GigabitEthernet 1/1 port1 interface GigabitEthernet 1/2 interconnect AW-IHT-1271(config)# AW-IHT-1271(config)# erps 1 mep port0 sf 1 aps 1 port1 sf 1 aps 1 AW-IHT-1271(config)# AW-IHT-1271(config)# erps 1 revertive 1 AW-IHT-1271(config)# AW-IHT-1271(config)# erps 1 rpl owner port1...
  • Page 44 update Update existing entry inner-tag Setup inner tag options interface Setup NNI port list ivid Setup internal EVC VLAN ID learning Setup learning outer-tag Setup outer tag options Setup EVC VLAN ID Setup inner tag add properties Setup added tag DEI Setup added tag PCP preserve Setup tag PCP/DEI preservation...
  • Page 45 <port_type_list> Port list for all port types <1-4095> EVC VLAN ID EXAMPLE AW-IHT-1271(config)# evc 1 outer-tag add vid 3 AW-IHT-1271(config)# event Trap event severity level. SYNTAX event group <group_name> { level <lvl> | syslog { enable | disable } | trap { enable | disable } | smtp { enable |...
  • Page 46 { [ join-time <1-20> ] [ leave-time <60-300> ] [ leave-all-time <1000-5000> ] }*1 Parameter time config gvrp timer value in units of centi seconds [cs] EXAMPLE AW-IHT-1271(config)# gvrp max-vlans 333 AW-IHT-1271(config)# gvrp time join-time 13 leave-all-time 3000 leave-time 200 AW-IHT-1271(config)# hostname Set system's network name. SYNTAX hostname < WORD >...
  • Page 47 VLAN interface configurations <vlan_list> List of VLAN interface numbers, 1-4095 <port_type_list> Port list in 1/1-12 for Gigabitethernet EXAMPLE AW-IHT-1271(config)# interface GigabitEthernet 1/1-8 AW-IHT-1271(config-if)# poe weekday Fri hour 22 AW-IHT-1271(config-if)# AW-IHT-1271(config)# interface vlan 3 AW-IHT-1271(config-if-vlan)# ip address dhcp AW-IHT-1271(config-if-vlan)# Internet Protocol.
  • Page 48 SYNTAX ip arp inspection ip arp inspection entry interface <port_type> <in_port_type_id> <vlan_var> <mac_var> <ipv4_var> ip arp inspection translate [ interface <port_type> <in_port_type_id> <vlan_var> <mac_var> <ipv4_var> ] ip arp inspection vlan <in_vlan_list> ip arp inspection vlan <in_vlan_list> logging { deny | permit | all } ip dhcp excluded-address <low_ip>...
  • Page 49 ip ssh ip verify source ip verify source translate Parameter Address Resolution Protocol dhcp Dynamic Host Configuration Protocol Domain Name System helper-address DHCP relay server http Hypertext Transfer Protocol igmp Internet Group Management Protocol name-server Domain Name System route Add IP route routing Enable routing for IPv4 and IPv6 source...
  • Page 50 log all entries translate arp inspection translate all entries vlan arp inspection vlan setting <vlan_list> arp inspection vlan list relay DHCP relay agent information information DHCP information option <Option 82> option DHCP option information DHCP information option(Option 82) policy Policy for handling the receiving DHCP packet already include the information option drop Drop the package when receive a DHCP message that already contains relay information keep...
  • Page 51 dhcp Dynamic Host Configuration Protocol interface Select an interface to configure vlan VLAN Interface <vlan_id> VLAN identifier(s): VID <ipv4_addr> Network <ipv4_netmask> Netmask <ipv4_addr> Gateway binding ip source binding interface ip source binding entry interface config <port_type> * or Gigibitethernet All switches or All ports Gigabitethernet 1 Gigabitethernet Port <port_type_id>...
  • Page 52 AW-IHT-1271(config)# ip arp inspection AW-IHT-1271(config)# ip dhcp relay AW-IHT-1271(config)# ip dns proxy AW-IHT-1271(config)# ip helper-address 192.168.1.1 AW-IHT-1271(config)# ip http secure-server AW-IHT-1271(config)# ip igmp snooping vlan 3 AW-IHT-1271(config)# ip name-server 192.168.1.6 AW-IHT-1271(config)# ip route 192.168.1.1 255.255.255.0 192.168.1.100 AW-IHT-1271(config)# ip routing AW-IHT-1271(config)# ip ssh...
  • Page 53 ipv6 IPv6 configuration commands SYNTAX ipv6 mld host-proxy [ leave-proxy ] ipv6 mld snooping ipv6 mld snooping vlan <v_vlan_list> ipv6 mld ssm-range <v_ipv6_mcast> <ipv6_prefix_length> ipv6 mld unknown-flooding ipv6 route <v_ipv6_subnet> { <v_ipv6_ucast> | interface vlan <v_vlan_id> <v_ipv6_addr> } Parameter Multicasat Listener Discovery route Configure static routes host-proxy...
  • Page 54 AW-IHT-1271(config)# ipv6 mld host-proxy leave-proxy AW-IHT-1271(config)# ipv6 mld snooping vlan 1 AW-IHT-1271(config)# lacp LACP settings. SYNTAX lacp system-priority <1-65535> Parameter system-priority System priority <1-65535> Priority value, lower means higher priority EXAMPLE AW-IHT-1271(config)# lacp system-priority 333 AW-IHT-1271(config)# line Configure a terminal line.
  • Page 55 EXAMPLE AW-IHT-1271(config)# line console 0 AW-IHT-1271(config-line)# lldp LACP configurations. SYNTAX lldp holdtime <2-10> lldp med datum { wgs84 | nad83_navd88 | nad83_mllw } lldp med fast <1-10> lldp med location-tlv altitude { meters | floors } <word11> lldp med location-tlv civic-addr { country | state | county | city | district | block | street | leading-street-direction |...
  • Page 56 discarded the LLDP information after "hold time" multiplied with "timer" seconds ). Media Endpoint Discovery. reinit LLDP tx reinitialization delay in seconds. timer Sets LLDP TX interval (The time between each LLDP frame transmitted in seconds). transmission-delay Sets LLDP transmision-delay. LLDP transmission delay (the amount of time that the transmission of LLDP frames will delayed after LLDP configuration has changed) in seconds.)
  • Page 57 civic-addr Civic address information and postal information country The two-letter ISO 3166 country code in capital ASCII letters - Example: DK, DE or state National subdivisions (state, canton, region, province, prefecture). county County, parish, gun (Japan), district. city City, township, shi (Japan) - Example: Copenhagen. district City division, borough, city district, ward, chou (Japan).
  • Page 58 <string250> Value for the corresponding selected civic address. elin-addr Emergency Location Identification Number, (e.g. E911 and others), such as defined by TIA or NENA. <dword25> ELIN value north Setting latitude direction to north. south Setting latitude direction to south. <word8> Latitude degrees (0.0000-90.0000).
  • Page 59 AW-IHT-1271(config)# lldp holdtime 5 AW-IHT-1271(config)# lldp med fast 5 AW-IHT-1271(config)# lldp reinit 3 AW-IHT-1271(config)# lldp timer 555 AW-IHT-1271(config)# lldp transmission-delay 333 Note: According to IEEE 802.1AB-clause 10.5.4.2 the transmission-delay must not be larger than LLDP timer * 0.25. LLDP timer changed to 13332 logging Syslog.
  • Page 60 Loop protection transmit time interval <1-10> Transmit time in second EXAMPLE AW-IHT-1271(config)# loop-protect AW-IHT-1271(config)# loop-protect shutdown-time 333 AW-IHT-1271(config)# loop-protect transmit-time 3 AW-IHT-1271(config)# MAC table entries/configuration. SYNTAX mac address-table aging-time <0,10-1000000> mac address-table static <mac_addr> vlan <vlan_id> interface <port_type> <port_type_list>...
  • Page 61 Gigabitethernet 1 Gigabit Ethernet port <port_type_list> Port list in 1/1-12 for Gigabitethernet EXAMPLE AW-IHT-1271(config)# mac address-table aging-time 3333 AW-IHT-1271(config)# Maintenance Entity Point SYNTAX mep <1-100> ais [ fr1m | fr1s | protect ] mep <1-100> aps <0-7> [ laps ] mep <1-100>...
  • Page 62 mep <1-100> down domain [ evc | lsp | port | pw | tp-link | tunnel-tp | vlan ] [ ( flow <uint> ) | ( level <0-7> ) | ( vid <vlan_id> ) ] mep <1-100> lb <0-7> ( count <uint> | dei | mpls | multi | uni ) Parameter <1-100>...
  • Page 63 mep-id The MEP-ID. This MEP instance is a half-MIP. peer-mep-id The peer MEP-ID. performance-monitoring Performance monitoring Data Set collection (MEF35). syslog Enable syslog. Test Signal This MEP is a UP-MEP. The MEP VID. MEP is VOE based. fr1m Frame rate is 1 f/min. fr1s Frame rate is 1 f/s.
  • Page 64 fr6h Frame rate is 6 f/hour. fr6m Frame rate is 6 f/min. domain Client flow domain EVC client flow. MPLS-TP LSP client flow. vlan VLAN client flow. flow Client flow instance. <uint> Client flow instance number value. ais-prio AIS injection priority. lck-prio LCK injection priority.
  • Page 65 not subtracted. single Delay Measurement based on DMM/DMR PDU. OAM PDU is transmitted with unicast MAC. The MAC is taken from peer MEP MAC database. <uint> Interval value. last-n The last N dalays used for average last N calculation. Min value is 10. mep-id Peer MEP-ID for unicast DM.
  • Page 66 Number of LBM PDUs to send value. Specify Time-To-Live value to be used for the MPLS-TP OAM LBM PDU. Default is to use TTL value 255. EXAMPLE AW-IHT-1271(config)# mep 1 cc 3 fr1m AW-IHT-1271(config)# AW-IHT-1271(config)# mep 1 ccm-tlv AW-IHT-1271(config)# monitor Set monitor configuration.
  • Page 67 Setting source port to tx will mirror both egress traffic. <port_type> Port type in Gigabitethernet <port_type_list> Port list in 1/1-12 for Gigabitethernet EXAMPLE AW-IHT-1271(config)# monitor destination interface GigabitEthernet 1/8 AW-IHT-1271(config)# monitor source cpu both AW-IHT-1271(config)# Multicast VLAN Registration configuration. SYNTAX mvr name <mvr_name> channel <profile_name>...
  • Page 68 name MVR multicast name <word16> MVR multicast VLAN name channel MVR channel configuration <word16> Profile name in 16 char's frame MVR control frame in TX priority Interface CoS priority <0-7> CoS priority ranges from 0 to 7 tagged Tagged IGMP/MLD frames will be sent igmp-address MVR address configuration used in IGMP <ipv4_ucast>...
  • Page 69 <0-31744> 0 - 31744 tenths of seconds compatible Compatible MVR operation mode EXAMPLE AW-IHT-1271(config)# mvr vlan 10 mode dynamic AW-IHT-1271(config)# Negate a command or set its defaults Table : configure – no Commands Command Function Authentication, Authorization and Accounting access...
  • Page 70 Maintenance Entity Point monitor Set monitor configuration. Multicast VLAN Registration configuration Configure NTP Power Over Ethernet port-security Enable/disable port security globally. Privilege Command privilege parameters Precision time Protocol (1588) Quality of Service radius-server Configure RADIUS rmon Remote Monitoring sflow Statistics flow. snmp-server Enable SNMP server spanning-tree...
  • Page 71 Disable HTTP Disable SSH telnet Disable Telnet EXAMPLE AW-IHT-1271(config)# no aaa authentication login ssh AW-IHT-1271(config)# access Access management SYNTAX no access management [<1~16>] no access management Parameter management Access management configuration <1~16> ID of access management entry EXAMPLE AW-IHT-1271(config)# no access management...
  • Page 72 EXAMPLE AW-IHT-1271(config)# access-list ace 1 AW-IHT-1271(config)# aggregation Aggregation mode SYNTAX no aggregation mode Parameter mode Traffic distribution mode EXAMPLE AW-IHT-1271(config)# no aggregation mode AW-IHT-1271(config)# banner Define a login banner SYNTAX no banner [ motd ] no banner exec no banner login...
  • Page 73 AW-IHT-1271(config)# no banner login AW-IHT-1271(config)# clock Configure time-of-day clock SYNTAX no clock summer-time no clock timezone Parameter summer-time Configure summer (daylight savings) time timezone Configure time zone EXAMPLE AW-IHT-1271(config)# no clock summer-time AW-IHT-1271(config)# no clock timezone AW-IHT-1271(config)# debug Debugging functions SYNTAX no debug mep <uint>...
  • Page 74 Near enad and far end is real time synchronized. <uint> Interval value. Transmit Test. EXAMPLE AW-IHT-1271(config)# no debug mep 1 dm tx dual 0 AW-IHT-1271(config)# AW-IHT-1271(config)# no debug mep 1 volatile AW-IHT-1271(config)# dot1x IEEE Standard for port-based Network Access Control...
  • Page 75 no dot1x authentication timer inactivity no dot1x authentication timer re-authenticate no dot1x feature { [ guest-vlan ] [ radius-qos ] [ radius-vlan ] } no dot1x guest-vlan [supplicant] no dot1x max-reauth-req no dot1x re-authentication no dot1x system-auth-control no dot1x timeout quiet-period no dot1x timeout tx-period Parameter authentication...
  • Page 76 EAPOL retransmissions. EXAMPLE AW-IHT-1271(config)# no dot1x authentication timer inactivity AW-IHT-1271(config)# no dot1x feature guest-vlan radius-qos radius-vlan AW-IHT-1271(config)# no dot1x guest-vlan supplicant AW-IHT-1271(config)# no dot1x max-reauth-req AW-IHT-1271(config)# no dot1x re-authentication AW-IHT-1271(config)# no dot1x system-auth-control...
  • Page 77 Specifies an ENCRYPTED password will follow level Set exec level password <1-15> Level number EXAMPLE AW-IHT-1271(config)# no enable secret level 15 AW-IHT-1271(config)# no enable password level 15 AW-IHT-1271(config)# Ethernet Protection Switching. SYNTAX no eps <uint> no eps <uint> [ command | hold off | revertive ] Parameter <uint>...
  • Page 78 1-64 [ guard | holdoff | mep | revertive | rpl | ( topology Change propagate ) | version | vlan ] Parameter 1-64 ERPS group number guard Guard holdoff Hold-off revertive Ring Protection Link topology-change Topology Change version Version vlan VLAN. propagate Propagate EXAMPLE AW-IHT-1271(config)# no erps 1 vlan AW-IHT-1271(config)# Ethernet Virtual Connections SYNTAX...

  • Page 79: Green-Ethernet

    [ <1-256> ] | [ ece <1-256> ] Parameter <1-256> EVC identifier EVC Control Entry EXAMPLE AW-IHT-1271(config)# no evc ece 1 AW-IHT-1271(config)# Green-ethernet Green ethernet (Power reduction) SYNTAX no green-ethernet eee optimize-for-power Parameter Powering down of PHYs when there is no traffic.
  • Page 80 Set GARP protocol parameter LeaveAllTime. See IEEE 802.1D-2004, clause 12.11 leave-time Set GARP protocol parameter LeaveTime. See IEEE 802.1D-2004, clause 12.11 EXAMPLE AW-IHT-1271(config)#no gvrp max-vlans 1 AW-IHT-1271(config)#no gvrp time join-time 10 AW-IHT-1271(config)#no gvrp time leave-all-time 2000 AW-IHT-1271(config)#no gvrp time leave-time 70 AW-IHT-1271(config)# hostname Set system's network name.
  • Page 81 Parameter vlan Vlan interface configurations <vlan_list> Vlan list EXAMPLE AW-IHT-1271(config)# no interface vlan 10 AW-IHT-1271(config)# Set system's network name. SYNTAX no ip arp inspection no ip arp inspection entry interface Gigabitethernet <port_type_id> <vlan_id> <mac_ucast> <ipv4_ucast> no ip arp inspection vlan <vlan_list> [logging] no dhcp execluded-address [<ip_address>...
  • Page 82 no ip igmp unknown-flooding no ip name-server no ip route <ipv4_addr> <ipv4_netmask> <ipv4_addr> no ip routing no ip source binding interface Gigabitethernet <port_type_id> <vlan_id> <ipv4_ucast>{ <ipv4_netmask>|<mac_ucast>} no ip ssh no ip verify source Parameter Address Resolution Protocol inspection ARP inspection entry arp inspection entry interface...
  • Page 83 relay DHCP relay agent configuration server enable DHCP server snoping DHCP snooping information DHCP information option(Option 82) option DHCP option policy Policy for handling the receiving DHCP packet already include the information option snooping DHCP snooping Domain Name System proxy DNS proxy service helper-address None.
  • Page 84 EXAMPLE AW-IHT-1271(config)# no ip arp inspection vlan 3 logging AW-IHT-1271(config)# no ip dhcp relay information option AW-IHT-1271(config)# no ip dns proxy AW-IHT-1271(config)# no ip helper-address AW-IHT-1271(config)# no ip http secure-redirect AW-IHT-1271(config)# no ip igmp snooping...
  • Page 85 A range of IPv4/IPv6 multicast addresses for the profile <Entryname : word16> Range entry name in 16 char's EXAMPLE AW-IHT-1271(config)# no ipmc profile ipv6 IPv6 configuration commands SYNTAX no ipv6 mld host-proxy [ leave-proxy ] no ipv6 mld snooping no ipv6 mld snooping [vlan <vlan_list>...
  • Page 86 IPv6 unicast address (except link-local address) of next-hop interface Select an interface to configure vlan VLAN Interface <vlan_id> VLAN identifier(s): VID <ipv6_linklocal> IPv6 link-local address of next-hop EXAMPLE AW-IHT-1271(config)# no ipv6 mld snooping AW-IHT-1271(config)# lacp LACP settings SYNTAX no lacp system-priority <1-65535> Parameter system-priority System priority <1-65535>...
  • Page 87 AW-IHT-1271(config)# no lacp system-priority 10000 AW-IHT-1271(config)# lldp LLDP configurations.. SYNTAX no lldp holdtime no lldp med datum no lldp med fast no lldp med location-tlv altitude no lldp med location-tlv civic-addr { country | state | county | city | district | block | street | leading-street-direction |...
  • Page 88 timer Sets LLDP TX interval (The time between each LLDP frame transmitted in seconds). tlv-select Which optional TLVs to transmit. transmission-delay Sets LLDP transmision-delay. LLDP transmission delay (the amount of time that the transmission of LLDP frames will delayed after LLDP configuration has changed) in seconds.) datum Set datum to default value.
  • Page 89 Trailing street suffix - Example: SW. zip-code Postal/zip code - Example: 2791. <0~31> Policy to delete. EXAMPLE AW-IHT-1271(config)# no lldp holdtime AW-IHT-1271(config)# no lldp med location-tlv civic-addr floor AW-IHT-1271(config)# no lldp reinit AW-IHT-1271(config)# no lldp timer AW-IHT-1271(config)# no lldp transmission-delay AW-IHT-1271(config)# logging...
  • Page 90 Syslog. SYNTAX no logging host no logging on Parameter host host Enable syslog server EXAMPLE AW-IHT-1271(config)# no logging host AW-IHT-1271(config)# no logging on AW-IHT-1271(config)# loop-protect Loop protection configuration SYNTAX no loop-protect no loop-protect shutdown-time no loop-protect transmit-time Parameter shutdown-time Loop protection shutdown time interval...
  • Page 91 1 Gigabit Ethernet port <port_type_list> Port list in 1/1-12 for Gigaethernet EXAMPLE AW-IHT-1271(config)# no mac address-table aging-time 10000 AW-IHT-1271(config)# Maintenance Entity Point SYNTAX no mep <uint> [ ais | aps | cc | ccm-tlv | lb | lck | link-state-tracking | lm-hli | lm-notif | lm-sdeg | lt |...
  • Page 92 no mep <uint> client domain [ evc | lsp | vlan ] flow [ <uint> | all ] no mep <uint> dm bin ( fd | ifdv ) <2-10> no mep <uint> dm bin threshold <1-50000> no mep <uint> dm [ ns | overflow-reset | proprietary | synchronized ] no mep <uint>...
  • Page 93 lm-hli High Loss Interval for Loss Measurement. lm-notif Loss Measurement JSON notifications lm-sdeg Signal Degrade for Loss Measurement. Link Trace. peer-mep-id The peer MEP-ID. performance-monitoring Performance monitoring Data Set collection (MEF35). syslog Enable syslog. Test Signal. MEP is VOE based. domain Client flow domain.
  • Page 94 The peer MEP-ID value. All peer MEP-ID will be deleted. Receive Test Signal. Transmit Test Signal. EXAMPLE AW-IHT-1271(config)# no mep 1 client domain evc flow all AW-IHT-1271(config)# AW-IHT-1271(config)# no mep 1 dm bin fd 2 AW-IHT-1271(config)# monitor Set monitor configuration.
  • Page 95 Gigabitethernet 1 Gigabit Ethernet Port <port_type_list> Port list in 1/1-12 for Gigabitethernet EXAMPLE AW-IHT-1271(config)# no monitor destination AW-IHT-1271(config)# no monitor source cpu AW-IHT-1271(config)# Multicast VLAN Registration configuration. SYNTAX no mvr no mvr name <word16> channel no mvr name <word16> frame priority no mvr name <word16>...
  • Page 96 Last Member Query Interval in tenths of seconds mode MVR mode of operation vlan MVR multicast vlan <vlan_list> MVR multicast VLAN list EXAMPLE AW-IHT-1271(config)# no mvr vlan 12 mode AW-IHT-1271(config)# Configure NTP. SYNTAX no ntp no ntp server <1-5> Parameter server Configure NTP server <1-5>...
  • Page 97 <1-16> profile id from 1 to 16 EXAMPLE AW-IHT-1271(config)# no poe profile id 1 AW-IHT-1271(config)# port-security Enable/disable port security globally. SYNTAX no port-security no port-security aging no port-security aging time...
  • Page 98 Time in seconds between check for activity on learned MAC addresses. EXAMPLE AW-IHT-1271(config)# no port-security aging time AW-IHT-1271(config)# privilege Command privilege parameters SYNTAX no privilege <cword> level <0-15> <line128> Parameter <cword> Valid words are 'config-vlan' 'configure' 'dhcp-pool' 'exec' 'if-vlan' 'interface' 'ipmc-profile'...
  • Page 99 no ptp <0-3> mode [ bcfrontend | boundary | e2etransparent | master | slave ] no ptp <0-3> servo [ ad | ai | ap | displaystates | phase-mode ] no ptp <0-3> uni <0-4> no ptp [ ext | system-time ] Parameter <0-3>...
  • Page 100 Disable phase mode in the servo <0-4> [0..4] Index in the slave table EXAMPLE AW-IHT-1271(config)# no ptp 0 uni 1 AW-IHT-1271(config)# Quality of Service SYNTAX no qos map cos-dscp <0-7> dpl 0-1 no qos map [ dscp-classify | dscp-cos | dscp-egress-translation | dscp-ingress-translation ] [ <0-63> | af11 | af12 |...
  • Page 101 dscp-ingress-translation Map for DSCP ingress translation <0~7> Specific class of service or range Specify drop precedence level Specific drop precedence level or range <0~63> Specific DSCP or range af11 Assured Forwarding PHB AF11(DSCP 10) af12 Assured Forwarding PHB AF12(DSCP 12) af13 Assured Forwarding PHB AF13(DSCP 14) af21...
  • Page 102 Police broadcast frames multicast Police multicast frames unicast Police unicast frames EXAMPLE AW-IHT-1271(config)# no qos storm unicast AW-IHT-1271(config)# radius-server Configure RADIUS. SYNTAX no radius-server attribute {32 | 4 | 95} no radius-server deadtime no radius-server host { <word1-255> | <ipv4_ucast> | <ipv6_ucast> } [ auth-port <0-65535> ] [ acct-port <0-65535>...
  • Page 103 Specify the number of retries to active server timeout Time to wait for a RADIUS server to reply EXAMPLE AW-IHT-1271(config)# no radius-server attribute 4 AW-IHT-1271(config)# no radius-server deadtime AW-IHT-1271(config)# no radius-server key AW-IHT-1271(config)# no radius-server retransmit AW-IHT-1271(config)# no radius-server timeout...
  • Page 104 Once the timeout reaches 0, the receiver and all its configuration is reset to defaults. EXAMPLE AW-IHT-1271(config)# no sflow agent-ip AW-IHT-1271(config)# no sflow collector-address AW-IHT-1271(config)# no sflow collector-port AW-IHT-1271(config)# no sflow max-datagram-size AW-IHT-1271(config)# no sflow timeout...
  • Page 105 no snmp-server no snmp-server access <Groupname : word32> model { v1 | v2c | v3 | any } level { auth | noauth | priv } no snmp-server community v2c no snmp-server community v3 <Community : word127> no snmp-server contact no snmp-server engined-id local no snmp-server host <Conf : word32>...
  • Page 106 contact Clear the SNMP server's contact string engined-id Set SNMP engine ID host Set SNMP host's configurations location Clear the SNMP server's location string security-to-group security-to-group configuration trap Set trap's configurations user user who can access SNMP server version Set the SNMP server's version view MIB view configuration <Community : word127>...
  • Page 107 AW-IHT-1271(config)# no snmp-server access 333 model any level auth AW-IHT-1271(config)# no snmp-server community v2c AW-IHT-1271(config)# no snmp-server engined-id local AW-IHT-1271(config)# no snmp-server host 333 AW-IHT-1271(config)# no snmp-server location AW-IHT-1271(config)# no snmp-server security-to-group model v2c name 132 AW-IHT-1271(config)# no snmp-server trap...
  • Page 108 Max number of transmit BPDUs per sec <Holdcount : 1-10> 1-10 per sec, 6 is default EXAMPLE AW-IHT-1271(config)# no spanning-tree edge bpdu-filter AW-IHT-1271(config)# no spanning-tree mode AW-IHT-1271(config)# no spanning-tree mst max-age AW-IHT-1271(config)# no spanning-tree recovery interval AW-IHT-1271(config)# no spanning-tree transmit hold-count...

  • Page 109: Port List For All Port Types

    All switches or All ports GigabitEthernet 1 Gigabit Ethernet Port <port_type_list> Port list for all port types <port_type_list> Port list in 1/1-12 EXAMPLE AW-IHT-1271(config)# no switchalert-management port-name interface * AW-IHT-1271(config)# switchport VLAN SYNTAX no switchport vlan mapping <1-12> <vlan_list> Parameter vlan Add VLAN translation entry into a group.
  • Page 110 AW-IHT-1271(config)# no switchport vlan mapping 1 12 AW-IHT-1271(config)# system Set the system description SYNTAX no system [ contact | description | location | name | reboot ] Parameter contact Clear the SNMP server's contact string description Clear the system description string...
  • Page 111 Time to wait for this TACACS+ server to reply (overrides default) <Port : 0-65535> TCP port number EXAMPLE AW-IHT-1271(config)# no tacacs-server deadtime AW-IHT-1271(config)# no tacacs-server host 192.168.1.1 port 10000 AW-IHT-1271(config)# no tacacs-server key AW-IHT-1271(config)# no tacacs-server timeout AW-IHT-1271(config)# udld Disable UDLD configurations on all fiber-optic ports.
  • Page 112 Disable UDLD on all fiber-optic interfaces. EXAMPLE AW-IHT-1271(config)# no udld enable AW-IHT-1271(config)# upnp Set UPnP's configurations. SYNTAX no upnp no upnp advertising-duration no upnp ttl Parameter advertising-duration Set advertising duration Set TTL value EXAMPLE AW-IHT-1271(config)# no upnp advertising-duration AW-IHT-1271(config)# no upnp ttl...
  • Page 113 EXAMPLE AW-IHT-1271(config)# no username admin AW-IHT-1271(config)# vlan Vlan commands. SYNTAX no vlan protocol { { eth2 { <0x600-0xffff> | arp | ip | ipx | at } } | { snap { <0x0-0xffffff> | rfc_1042 | snap_8021h } <0x0-0xffff> } | { llc <0x0-0xff> <0x0-0xff> } } group <word16>...
  • Page 114 <word16> Group Name (Range: 1 - 16 characters) <vlan_list> Vlan list ethertype s-custom-port EXAMPLE AW-IHT-1271(config)# no vlan 3 AW-IHT-1271(config)# no vlan ethertype s-custom-port AW-IHT-1271(config)# voice Voice appliance attributes. SYNTAX no voice vlan no voice vlan aging-time no voice vlan class no voice vlan oui <oui>...
  • Page 115 ‘EEE’ ‘GARP’ ‘GVRP’ ‘’Green_Ethernet' 'IP2' 'IPMC_Snooping' 'LACP' 'LLDP' 'Loop_Protect' 'MAC_Table' 'MEP' 'MVR' 'Maintenance' 'Mirroring' 'NTP' 'POE' 'Ports' 'Private_VLANs' 'QoS' 'RPC' 'Security' 'Spanning_Tree' 'System' 'Timer' 'UPnP' 'VCL' 'VLANs' 'Voice_VLAN' ‘XXRP’ 'sFlow' level Web privilege group level EXAMPLE AW-IHT-1271(config)# no web privilege group LACP level AW-IHT-1271(config)# Configure NTP.
  • Page 116 <ipv6_ucast> ipv6 address <hostname> domain name EXAMPLE AW-IHT-1271(config)# ntp server 3 ip-address 192.168.1.1 AW-IHT-1271(config)# Configure poe. SYNTAX poe management mode { class-consumption | class-reserved-power | allocation-consumption | allocation-reserved-power | lldp-consumption | lldp-reserved-power } poe ping-check { enable | disable } poe select-all <port_list>...
  • Page 117 Max. port power determined by LLDP Media protocol, and power is managed according to reserved power. EXAMPLE AW-IHT-1271(config)# poe management mode allocation-consumption AW-IHT-1271(config)# poe management mode allocation-reserved-power AW-IHT-1271(config)# poe management mode class-consumption AW-IHT-1271(config)# poe management mode class-reserved-power AW-IHT-1271(config)# poe management mode lldp-consumption...
  • Page 118 <10-10000000> seconds EXAMPLE AW-IHT-1271(config)# port-security agin time 1000 AW-IHT-1271(config)# privilege Command privilege parameters. SYNTAX privilege { exec | configure | config-vlan | line | interface | if-vlan | ipmc-profile | snmps-host | stp-aggr | dhcp-pool | rfc2544-profile } level <privilege> <cmd>...
  • Page 119 AW-IHT-1271(config)# privilege config-vlan level 10 LINE AW-IHT-1271(config)# privilege configure level 10 LINE AW-IHT-1271(config)# privilege dhcp-pool level 10 LINE AW-IHT-1271(config)# Precision time Protocol (1588) SYNTAX ptp <0-3> clk sync <1-1000> ap <1-40> ptp <0-3> domain <0-127> ptp <0-3> filter { [ delay <0-6> ] | [ dist <1-10> ] | [ filter-type ( basic | ms-pdv ) ] | [ period <1-10000> ] } ptp <0-3>...
  • Page 120 Parameter config-vlan VLAN Configuration Mode configure Global configuration mode <0-3> Clock instance [0-3] Update the 1PPS and External clock output configuration and vcxo frequency rate adjustment option system-time Enable synchronization between PTP time and system time tc-internal Define the internal mode used in TC's Set PTP slave clock options domain Clock domain for PTP...
  • Page 121 delay Set delay filter parameter dist Set offset filter dist parameter filter-type Define offset filter type period Set offset filter period parameter <0-6> Log2 of timeconstant in delay lowpass filter, valid range: 1-6, Setting the value to 0 means use the same filter function as for the offset measurement, in this case the delay filter uses the 'period' and 'dist' parameters.
  • Page 122 clock-domain Define clock domain used by this instance. Instances with different clock domain can have different time. dscp Define DSCP field used in IPv4 enacpaulation ethernet Ethernet protocol encapsulation ethernet-mixed Ethernet protocol encapsulation using mix of unicast and multicast define PTP clock instance identifier ip4mixed IPv4 mixed multicast/unicast protocol encapsulation ip4multi...
  • Page 123 <vlan_id> VLAN id <0-255> PTP clock priority1: range = 0-255 Output modifiers Set 'D' parameter in the servo Set 'I' parameter in the servo Set 'P' parameter in the servo displaystates Enable logging of servo parameters on the console phase-mode Enable phase mode in the servo <1-10000>...
  • Page 124 Set mode <0-3> mode [0-3] (0 = MODE_30BIT, 1 = MODE_32BIT, 2 = MODE_44BIT, 3 =MODE_48BIT) EXAMPLE AW-IHT-1271(config)# ptp 1 clk sync 1 ap 1 AW-IHT-1271(config)# AW-IHT-1271(config)# ptp 1 ho adj-threshold 1 filter 19 AW-IHT-1271(config)# AW-IHT-1271(config)# ptp 1 log 2...
  • Page 125 Table : configure – qos Commands Command Function Global QoS Map/Table QoS Control Entry storm Storm policer Global QoS Map/Table. SYNTAX qos map cos-dscp <0~7> dpl <dpl : 0~1> dscp { <DscpNum : 0-63> | { be | af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef | va } } qos map dscp-classify { <dscpNum : 0~63>...
  • Page 126 Specify drop precedence level <Dpl : 0~1> Specific drop precedence level or range dscp Specify DSCP <DscpNum : 0-63> Specific DSCP Specify class of QoS <Cos : 0-7> Specific class of QoS af11 Assured Forwarding PHB AF11(DSCP 10) af12 Assured Forwarding PHB AF12(DSCP 12) af13 Assured Forwarding PHB AF13(DSCP 14) af21...
  • Page 127 Expedited Forwarding PHB(DSCP 46) Voice Admit PHB(DSCP 44) EXAMPLE AW-IHT-1271(config)# qos map cos-dscp 5 dpl 1 dscp 20 AW-IHT-1271(config)# QoS Control Entry. SYNTAX qos qce refresh qos qce { [ update ] } <Id : 1-256> [ { next <Id : 1-256> } | last ] [ ingress interface *|Gigabitethernet <PORT_LIST>...
  • Page 128 dmac-type Specify DMAC type frametype Specify frame type ingress Ingress interfaces last Place QCE at the end next Place QCE before the next QCE ID Specify PCP (Priority Code Point) smac Specify SMAC. If 'qos qce dmac-dip' is set, this parameter specifies the DMAC Specify tag options Specify VLAN ID Specify class of service...
  • Page 129 af33 Assured Forwarding PHB AF33(DSCP 30) af41 Assured Forwarding PHB AF41(DSCP 34) af42 Assured Forwarding PHB AF42(DSCP 36) af43 Assured Forwarding PHB AF43(DSCP 38) Default PHB(DSCP 0) for best effort traffic Class Selector PHB CS1 precedence 1(DSCP 8) Class Selector PHB CS2 precedence 2(DSCP 16) Class Selector PHB CS3 precedence 3(DSCP 24) Class Selector PHB CS4 precedence 4(DSCP 32) Class Selector PHB CS5 precedence 5(DSCP 40)
  • Page 130 Interfaces Gigabitethernet 1 Gigabit Ethernet Port <PORT_LIST> Port list in 1/1-12 for Gigabitethernet EXAMPLE AW-IHT-1271(config)# qos qce 100 vid any AW-IHT-1271(config)# storm Storm policer. SYNTAX qos storm { unicast | multicast | broadcast } <Rate : 1,2,4,8,16,32,64,128,256,512,1024> [ kfps ]...
  • Page 131 radius-server Configure RADIUS. SYNTAX radius-server attribute 32 <line1-255> radius-server attribute 4 <ipv4_ucast> radius-server attribute 95 <ipv6_ucast> radius-server deadtime <1-1440> radius-server host { <word1-255> | <ipv4_ucast> | <ipv6_ucast> } [ auth-port <0-65535> ] [ acct-port <0-65535> ] [ timeout <1-1000> ] [ retransmit <1-1000> ] [ key <line1-63> ] radius-server key <line1-63>...
  • Page 132 <Key : line1-63> The shared key <1-1000> Number of retries for a transaction EXAMPLE AW-IHT-1271(config)# radius-server host device key 12 AW-IHT-1271(config)# rapid-ring Set Rapid Ring's configurations SYNTAX rapid-ring entry <uint8> role ( disabled | master | member | rapid-chain ) port1 GigabitEthernet <port_type_id>...
  • Page 133 1 Gigabit Ethernet Port <port_type_id> Port ID in 1/1-12 port2 Set port2 EXAMPLE AW-IHT-1271(config)# rapid-ring entry 0 role disabled port1 GigabitEthernet 1/1 port2 GigabitEthernet 1/1 AW-IHT-1271(config)# ring-to-ring Set Ring to Ring's configurations SYNTAX ring-to-ring role ( active | backup | disabled ) port GigabitEthernet <port_type_id>...
  • Page 134 Remote Monitoring. SYNTAX rmon alarm <1-65535> <WORD> <1-2147483647> { absolute | delta } rising-threshold <-2147483648-2147483647> [ <0-65535> ] falling-threshold <-2147483648-2147483647> [ <0-65535> ] { [ rising | falling | both ] } rmon alarm <1-65535> { ifInOctets | ifInUcastPkts | ifInNUcastPkts | ifInDiscards | ifInErrors | ifInUnknownProtos | ifOutOctets | ifOutUcastPkts | ifOutNUcastPkts | ifOutDiscards | ifOutErrors } <uint>...
  • Page 135 Test each sample directly delta Test delta between samples rising-threshold Configure the rising threshold EXAMPLE AW-IHT-1271(config)# rmon alarm 10000 ifInErrors 10 9999 absolute rising-threshold 0 falling-threshold 0 both AW-IHT-1271(config)# sflow Statistics flow SYNTAX sflow agent-ip { ipv4 <ipv4_addr> | ipv6 <ipv6_addr> }...
  • Page 136 Once the timeout reaches 0, the receiver and all its configuration is reset to defaults. <0-2147483647> Number in seconds EXAMPLE AW-IHT-1271(config)# sflow agent-ip ipv4 192.168.1.2 AW-IHT-1271(config)# sflow collector-port 3 AW-IHT-1271(config)# sflow max-datagram-size 333 AW-IHT-1271(config)# sflow timeout 3333 AW-IHT-1271(config)#...
  • Page 137 smtp Set email information SYNTAX smtp delete mailaddress <1-6> smtp delete [ returnpath | sender | server | username ] smtp mailaddress <1-6> <word47> smtp ( returnpath | sender | server ) <word47> smtp username <word31> <word31> Parameter delete Delete command mailaddress Configure email address returnpath...
  • Page 138 <word31> Configure email password EXAMPLE AW-IHT-1271(config)# smtp delete mailaddress 1 AW-IHT-1271(config)# smtp delete returnpath AW-IHT-1271(config)#...
  • Page 139 snmp-server Set SNMP server's configurations SYNTAX snmp-server Table : configure –snmp-server Commands Command Function access access configuration community Set the SNMP community contact Set the SNMP server's contact string engine-id Set SNMP engine ID host Set SNMP host's configurations location Set the SNMP server's location string security-to-group security-to-group configuration...
  • Page 140 <ViewName : word255> read view name <WriteName : word255> write view name EXAMPLE AW-IHT-1271(config)# snmp-server access text model v2c level noauth write text AW-IHT-1271(config)# community Set the SNMP community. SYNTAX snmp-server community v2c <Community : word127> [ ro | rw ] snmp-server community v3 <word127>...
  • Page 141 <Community : word127> Community word <ipv4_addr> IPv4 address <ipv4_netmask> IPv4 netmask EXAMPLE AW-IHT-1271(config)# snmp-server community v2c text AW-IHT-1271(config)# contact Set the SNMP server's contact string. SYNTAX snmp-server contact <line255> Parameter contact Set the SNMP server's contact string <line255> contact string...
  • Page 142 AW-IHT-1271(config)# snmp-server engine-id local 1234567891 AW-IHT-1271(config)# host Set SNMP host's configurations. SYNTAX snmp-server host <word32> Parameter <word32> Name of the host configuration EXAMPLE AW-IHT-1271(config)# snmp-server host text AW-IHT-1271(config-snmps-host)# location Set the SNMP server's location string. SYNTAX snmp-server location <line255> Parameter <line255>...
  • Page 143 <SecurityName : word32> security user name group security group <GroupName : word32> security group name EXAMPLE AW-IHT-1271(config)# snmp-server security-to-group model v2c name text group text AW-IHT-1271(config)# trap Set trap's configurations. SYNTAX snmp-server trap EXAMPLE AW-IHT-1271(config)# snmp-server trap...
  • Page 144 Set Privacy Set DES protocol Set AES protocol <word8-32> Set privacy password EXAMPLE AW-IHT-1271(config)# snmp-server user text engine-id 1234567891 md5 12345678 priv aes 12345678 AW-IHT-1271(config)# version Set the SNMP server's version. SYNTAX snmp-server version { v1 | v2c | v3 }...
  • Page 145 MIB view name <OidSubtree : word255> MIB view OID include Ixcluded type from the view exclude Excluded type from the view EXAMPLE AW-IHT-1271(config)# snmp-server view text .1 include AW-IHT-1271(config)# spanning-tree Spanning Tree protocol Table : configure –spanning-tree Commands Command Function aggregation...
  • Page 146 EXAMPLE AW-IHT-1271(config)# spanning-tree aggregation AW-IHT-1271(config-stp-aggr)# edge Edge ports. SYNTAX spanning-tree edge bpdu-filter spanning-tree edge bpdu-guard Parameter bpdu-filter Enable BPDU filter (stop BPDU tx/rx) bpdu-guard Enable BPDU guard EXAMPLE AW-IHT-1271(config)# spanning-tree edge bpdu-filter AW-IHT-1271(config)# mode STP protocol mode. SYNTAX...
  • Page 147 Multiple Spanning Tree (802.1s) rstp Rabid Spanning Tree (802.1w) 802.1D Spanning Tree EXAMPLE AW-IHT-1271(config)# spanning-tree mode stp AW-IHT-1271(config)# STP bridge instance. SYNTAX spanning-tree mst <Instance : 0-7> priority <Prio : 0-61440> spanning-tree mst < Instance : 0-7> vlan <vlan_list>...
  • Page 148 Hop count range <Name : word32> Name of the bridge revision Revision keyword <0-65535> Revision number EXAMPLE AW-IHT-1271(config)# spanning-tree mst 7 vlan 10 AW-IHT-1271(config)# recovery The error recovery timeouts. SYNTAX spanning-tree recovery interval <Interval : 30-86400> Parameter interval The interval <Interval : 30-86400>...
  • Page 149 <Holdcount : 1-10> Parameter hold-count Max number of transmit BPDUs per sec <Holdcount : 1-10> 1-10 per sec, 6 is default EXAMPLE AW-IHT-1271(config)# spanning-tree transmit hold-count 5 AW-IHT-1271(config)# switchalert-management switchAlert Management configuration SYNTAX switchalert-management delete <1-6> switchalert-management get activity-code switchalert-management link-option [automatic | ( manual <1-65535>...
  • Page 150 <word47> SwitchAlert Management IP address or host name disable Disable SwitchAlert Management mode enable Enable SwitchAlert Management mode EXAMPLE AW-IHT-1271(config)# switchalert-management delete 1 AW-IHT-1271(config)# switchalert-management get activity-code AW-IHT-1271(config-stp-aggr)# switchport Set switching mode characteristics SYNTAX switchport vlan mapping <1-12> <vlan_list> <vlan_id>...
  • Page 151 Add VLAN translation entry into a group. <1-12> Group id <vlan_list> <vlan_id> EXAMPLE AW-IHT-1271(config)# switchport vlan mapping 1 1 1 AW-IHT-1271(config)# system Set the SNMP server's configurations SYNTAX system contact <v_line255> system location <v_line255> system name <v_line255> Parameter contact...
  • Page 152 <word1-255> Hostname <ipv4_ucast> IPv4 address <ipv6_ucast> IPv6 address port TCP port for TACACS+ server <0-65535> TCP port number EXAMPLE AW-IHT-1271(config)# tacacs-server deadtime 300 AW-IHT-1271(config)# tacacs-server host 192.168.1.2 AW-IHT-1271(config)# tacacs-server key 33 AW-IHT-1271(config)# tacacs-server timeout 300 AW-IHT-1271(config)# tzidx Configure timezone city/area...
  • Page 153 <int> Parameter <int> index of city/area EXAMPLE AW-IHT-1271(config)# tzidx 5 AW-IHT-1271(config)# udld Enable UDLD in the aggressive or normal mode and to set the configurable message timer on all fiber-optic ports. SYNTAX udld [ aggressive | enable | ( message time-interval <7-90> ) ]...
  • Page 154 7 to 90 seconds(currently default message time interval 7 sec is supported). EXAMPLE AW-IHT-1271(config)# udld message time-interval 7 AW-IHT-1271(config)# upnp Set UPnP's configurations. SYNTAX upnp upnp advertising-duration <100-86400> upnp ttl <1-255> Parameter advertising-duration Set advertising duration Set TTL value <100-86400>...
  • Page 155 The ENCRYPTED (hidden) user password. Notice the ENCRYPTED password will be decoded by system internally. You cannot directly use it as same as the Plain Text and it is not human-readable text normally. EXAMPLE AW-IHT-1271(config)# username jefferson privilege 15 password none AW-IHT-1271(config)# (config)# vlan...
  • Page 156 VLAN commands. SYNTAX vlan <vlan_list> vlan ethertype s-custom-port <0x0600-0xffff> vlan protocol { { eth2 { <0x600-0xffff> | arp | ip | ipx | at } } | { snap { <0x0-0xffffff> | rfc_1042 | snap_8021h } <0x0-0xffff> } | { llc <0x0-0xff> <0x0-0xff> } } group <word16> Parameter <vlan_list>...
  • Page 157 Protocol-based VLAN group commands <word16> Group Name (Range: 1 - 16 characters) EXAMPLE AW-IHT-1271(config)# vlan ethertype s-custom-port 0x1111 AW-IHT-1271(config)# vlan protocol eth2 arp group 123 AW-IHT-1271(config)# voice Voice appliance attributes. SYNTAX voice vlan voice vlan aging-time <aging_time> voice vlan class { <traffic_class> | low | normal | medium | high } voice vlan oui <oui>...
  • Page 158 <line32> Description line Set VLAN ID <vlan_id> VLAN ID, 1-4095 EXAMPLE AW-IHT-1271(config)# voice vlan aging-time 3333 AW-IHT-1271(config)# voice vlan class 7 AW-IHT-1271(config)# voice vlan vid 3333 AW-IHT-1271(config)# Web. SYNTAX web privilege group <CWORD> level { [ cro <0-15> ] [ crw <0-15> ] [ sro <0-15> ] [ srw <0-15> ] }...
  • Page 159 Configuration Read-write level Status/Statistics Read-only level Status/Statistics Read-write level EXAMPLE AW-IHT-1271(config)# web privilege group ptp level sro (config)#...

  • Page 160: Copy Commands Of Cli

    Output modifiers syntax-check Perform syntax check on source configuration begin Begin with the line that matches exclude Exclude lines that match include Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# copy startup-config running-config syntax-check | include...

  • Page 161: Delete Commands Of Cli

    DELETE Commands of CLI Delete one file in flash: file system SYNTAX Delete <Path : word> Parameter <Path : word> Name of file to delete EXAMPLE AW-IHT-1271# delete text AW-IHT-1271#...

  • Page 162: Dir Commands Of Cli

    Begin with the line that matches exclude Exclude lines that match include Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# dir Directory of flash: r- 2011-01-01 00:00:00 720 default-config rw 2011-01-01 00:00:11 1777 startup-config 2 files, 2497 bytes total.

  • Page 163: Disable Commands Of Cli

    DISABLE Commands of CLI Turn off privileged commands SYNTAX disable <0-15> Parameter <0-15> Privilege level EXAMPLE AW-IHT-1271# disable 10 AW-IHT-1271#...

  • Page 164: Do Commands Of Cli

    DO Commands of CLI To run exec commands in config mode SYNTAX Do <LINE>{[LINE]} Parameter LINE Exec Command EXAMPLE AW-IHT-1271# do show clock System Time : 2011-01-01T00:03:44+00:00...

  • Page 165: Dot1X Of Cli

    [ interface ( <port_type> [ <plist> ] ) ] Parameter initialize Force re-authentication immediately interface Interface All switches or All ports Gigabitethernet 1 GigabitEthernet port <port_type_list> Port list in 1/1-12 for Gigabitethernet EXAMPLE AW-IHT-1271# dot1x initialize interface GigabitEthernet 1/1-12 AW-IHT-1271#...

  • Page 166: Enable Of Cli

    ENABLE of CLI Turn on privileged commands Syntax Enable <1-15> Parameter <0-15> Choose privileged level EXAMPLE AW-IHT-1271# enable 10 AW-IHT-1271#...
  • Page 167 1-64 command [ clear | force | manual ] [ port0 | port1 ] Parameter 1-64 ERPS group number command Administrative Command clear Clear command force Force command manual Manual command port0 ERPS Port 0 interface port1 ERPS Port 1 interface EXAMPLE AW-IHT-1271# erps 7 command manual port1 AW-IHT-1271#...

  • Page 168: Firmware Of Cli

    < TFTPServer_path_file : word> Parameter swap Swap between Active and Alternate firmware image. upgrade Firmware upgrade <TFTPServer_path_file : word> TFTP Server IP address, path and file name for the server containing the new image. EXAMPLE AW-IHT-1271# firmware upgrade tftp://192.168.1.1/path/GEL2706 Programming image... AW-IHT-1271#...
  • Page 169 <vlan_id> Parameter dhcp Dhcp commands retry Restart the DHCP query process interface Interface vlan Vlan interface <vlan_id> Vlan ID EXAMPLE AW-IHT-1271# ip dhcp retry interface vlan 1 % Failed to restart DHCP client on VLAN = 1.
  • Page 170 Ipv6 dhcp-client restart Ipv6 dhcp-client restart interface vlan <vlan_list> Parameter dhcp-client Manage DHCPv6 client serviceretry restart Restart DHCPv6 client servicevlan interface Select an interface to configure vlan VLAN of IPv6 interface <vlan_list> IPv6 interface VLAN list EXAMPLE AW-IHT-1271# ipv6 dhcp-client restart AW-IHT-1271#...

  • Page 171: Link-Oam Of Cl I

    All switches or All ports GigabitEthernet 1 Gigabit Ethernet Port <port_type_list> Port list for all port types <port_type_list> Port list in 1/1-12 EXAMPLE AW-IHT-1271# link-oam remote-loopback start interface * AW-IHT-1271# NO of CLI Negate a command or set its defaults Syntax no debug prompt...
  • Page 172 Parameter debug Debugging functions prompt Clear prompt for testing EXAMPLE AW-IHT-1271# no debug prompt AW-IHT-1271#...
  • Page 173 PING of CLI Send ICMP echo messages Syntax ping ip <word1-255> [ repeat <Count : 1-60> ] [ size <Size : 2-1452> ] [ interval <Seconds : 0-30> ] ping ipv6 <ipv6_addr> [ repeat <Count : 1-60> ] [ size <Size : 2-1452> ] [ interval <Seconds : 0-30> ] [ interface vlan <vlan_id>...
  • Page 174 VLAN Interface <vlan_id> VLAN identifier(s): VID EXAMPLE AW-IHT-1271# ping ip 33 interval 22 repeat 33 size 444 PING server 0.0.0.33, 444 bytes of dataitialize interfac...

  • Page 175: Platform Of Cli

    PLATFORM of CLI Platform configuration Syntax platform debug [ allow | deny ] Parameter debug Debug command setting allow Allow debug commands deny Deny debug commands EXAMPLE AW-IHT-1271# platform debug allow AW-IHT-1271# AW-IHT-1271# platform debug deny AW-IHT-1271#...
  • Page 176 PTP of CLI Misc non persistent 1588 settings Syntax ptp <0-3> local-clock ratio <-10000000-10000000> ptp <0-3> local-clock update ptp <0-3> wireless delay <0-1000000000> <0-1000000> interface ptp <0-3> wireless delay <0-1000000000> interface * ptp <0-3> wireless delay <0-1000000000> interface ( * | GigabitEthernet ) <port_type_list> ptp <0-3>...
  • Page 177 Interface EXAMPLE AW-IHT-1271# ptp 0 wireless pre-notification interface * Wireless mode not available for ptp instance 0, port 1 Wireless mode not available for ptp instance 0, port 2 Wireless mode not available for ptp instance 0, port 3...

  • Page 178: Reload Of Cli

    % Reloading defaults. Please stand by. AW-IHT-1271# reload cold % Cold reload in progress, please stand by. AW-IHT-1271# +M25PXX : Init device with JEDEC ID 0x20BA19. Luton26 board detected (VSC7427 Rev. D). RedBoot(tm) bootstrap and debug environment [ROMRAM] Non-certified release, version 1_15a-Vitesse - built 18:36:46, Sep 30 2016 Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
  • Page 179 <0~15> Send a message to multiple lines <LINE> Message to be sent to lines, in 128 char's EXAMPLE AW-IHT-1271# send * yes,i do Enter TEXT message. End with the character 'y'. ----------------------------------------- *** Message from line 0: yes,i do -----------------------------------------...
  • Page 180 SHOW of CLI Show running system information Table : SHOW Commands Command Function Login methods access Access management access-list Access list aggregation Aggregation port configuration clock Configure time-of-day clock dot1x IEEE Standard for port-based Network Access Control Ethernet Protection Switching erps Ethernet Ring Protection Switching Ethernet Virtual Connections...
  • Page 181 privilege Display command privilege process process Precision time Protocol (1588) pvlan PVLAN status Quality of Service radius-server RADIUS configuration rapid-ring Display Rapid Ring configurations rmon RMON statistics running-config Show running system information sflow Statistics flow. smtp Show email information snmp Display SNMP configurations spanning-tree STP Bridge...
  • Page 182 Begin with the line that matches exclude Exclude lines that match include Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show aaa console : local telnet : local : local http : local AW-IHT-1271# access Access management.
  • Page 183 Switch access management mode is disabled W: WEB/HTTPS S: SNMP T: TELNET/SSH Idx VID Start IP Address End IP Address W S T --- --- ------------------------------- ------------------------------ - - - AW-IHT-1271# show access management statistics Access Management Statistics: ----------------------------- HTTP Receive: Allow: Discard: HTTPS Receive:...
  • Page 184 show access-list [ interface [ * | Gigabitetherne <PORT_LIST> ] ] [ rate-limiter [ <RateLimiterList : 1~16> ] ] [ ace statistics [ <AceId : 1~256> ] ] show access-list ace-status [ static ] [ loop-protect ] [ dhcp ] [ upnp ] [ arp-inspection ] [ mep ] [ ipmc ] [ ip-source-guard ] [ ip-mgmt ] [ conflicts ] Parameter interface...
  • Page 185 Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show access-list ace statistics rate-limiter Switch access-list ace number: 0 Switch access-list rate limiter ID 1 is 1 pps Switch access-list rate limiter ID 2 is 1 pps...
  • Page 186 Begin with the line that matches exclude Exclude lines that match include Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show aggregation Mode Aggregation Mode: SMAC : Enabled DMAC : Disabled : Enabled Port : Enabled AW-IHT-1271# clock Configure time-of-day clock.
  • Page 187 AW-IHT-1271# show clock detail System Time : 2011-01-01T00:53:57+00:00 Timezone : Timezone Offset : 0 ( 0 minutes) Timezone Acronym : Daylight Saving Time Mode : Disabled. Daylight Saving Time Start Time Settings : Week: 0 Day: 0 Month: 0 Date: 0...
  • Page 188 Show status in a brief format interface Interface All Switches or All Ports Gigbitethernet 1 Gigabit Ethernet Port <port_type_list> Port list in 1/1-12 for Gigabitethernet EXAMPLE AW-IHT-1271# show dot1x statistics radius Rx Access Rx Other Rx Auth. Rx Auth. Interface Challenges Requests Successes Failures...
  • Page 189 Begin with the line that matches exclude Exclude lines that match include Include lines that match <line> String to match output lines EXAMPLE AW-IHT-1271# show eps detail ? Output modifiers <range_list> The range of EPS instances. <cr> AW-IHT-1271# show eps detail EPS state is: Inst...
  • Page 190 ERPS Port 0 interface port1 ERPS Port 1 interface EXAMPLE AW-IHT-1271# erps 1 command clear port1 AW-IHT-1271# Ethernet Protection Switching SYNTAX show evc { [ | ( begin | exclude | include ) <line> ] | [ <1-256> ( | ( begin | exclude | include ) <line> ) | ( ece ( ( | ( begin | exclude | include ) <line>...
  • Page 191 Statistic counters begin Begin with the line that matches exclude Exclude lines that match include Include lines that match EXAMPLE AW-IHT-1271# show evc 1 AW-IHT-1271# event Show trap event configuration SYNTAX show event [ port ] Parameter port Show event port configuration...
  • Page 192 AW-IHT-1271# show event port Port Active LinkOn LinkOff Overload RxThreshold TrafficDuration Syslog Trap SMTP Switch2go DigitalOut Severity ---- ------- ------- ------- -------- ----------- --------------- ------- ------- ------- --------- ---------- -------- enable enable enable disable 0 enable disable disable disable disable...
  • Page 193 All Switches or All ports <port_type > GigabitEthernet or <port_type_list> Port list in 1/1-12 for Gigabitethernet EXAMPLE AW-IHT-1271# show green-ethernet eee Interface Lnk EEE Capable EEE Enabled LP EEE Capable Power Save ---------------------- --- ----------- ----------- --------------- ------------- GigabitEthernet 1/1...
  • Page 194 Begin with the line that matches exclude Exclude lines that match include Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show history show evc statistics show green-ethernet EEE show green-ethernet EEE interface GigabitEthernet show history AW-IHT-1271# interface Interface status and configuration.
  • Page 195 show interface <port_type> <port_type_list> capabilities show interface <port_type> <port_type_list> statistics [ { packets | bytes | errors | discards | filtered | { priority [ <0~7> ] } } ] [ { up | down } ] show interface <port_type> <port_type_list> status show interface <port_type>...
  • Page 196 EXAMPLE AW-IHT-1271# show interface GigabitEthernet 1/1-3 capabilities GigabitEthernet 1/1 Capabilities: SFP Type: None SFP Vendor name: SFP Vendor PN: SFP Vendor revision: GigabitEthernet 1/2 Capabilities: SFP Type: None SFP Vendor name: SFP Vendor PN: SFP Vendor revision: GigabitEthernet 1/3 Capabilities:...
  • Page 197 show ip http server secure status show ip igmp snooping [ vlan <vlan_list> ] [ group-database [ interface <port_type> <port_type_list> ] [ sfm-information ] ] [ detail ] show ip igmp snooping mrouter [ detail ] show ip interface brief show ip name-server show ip route show ip source binding [ dhcp-snooping | static ] [ interface <port_type>...
  • Page 198 http Hypertext Transfer Protocol server HTTP web server secure Secure status Status igmp Internet Group Management Protocol snooping Snooping IGMP vlan Search by VLAN <vlan_list> VLAN identifier(s): VID group-database Multicast group database from IGMP sfm-information Including source filter multicast information from IGMP detail Detail running information/statistics of IGMP snooping mrouter...
  • Page 199 EXAMPLE AW-IHT-1271# show ip statistics system IPv4 statistics: Rcvd: 411 total in 36226 bytes 273 local destination, 0 forwarding 0 header error, 0 address error, 0 unknown protocol 0 no route, 0 truncated, 138 discarded Sent: 0 total in 0 byte...
  • Page 200 Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show ipmc range AW-IHT-1271# ipv6 IPv6 configuration commands. SYNTAX show ipv6 interface [ vlan <vlan_list> { brief | statistics } ] [ | {begin | exclude | include } <LINE>] show ipv6 mld snooping [ vlan <vlan_list>...
  • Page 201 Multicasat Listener Discovery snooping Snooping MLD vlan Search by VLAN <vlan_list> VLAN identifier(s): VID group-database Multicast group database from MLD interface Search by port <port_type> Gigabitethernet All Switches or All ports Gigabitethernet 1 Gigabit Ethernet Port <port_type_list> Port list in 1/1-12 for Gigabitethernet sfm-information Including source filter multicast information from MLD detail...
  • Page 202 AW-IHT-1271# show ipv6 statistics system IPv6 statistics: Rcvd: 2 total in 112 bytes 0 local destination, 0 forwarding 0 header error, 0 address error, 0 unknown protocol 0 no route, 0 truncated, 2 discarded Sent: 8 total in 512 bytes...
  • Page 203 Exclude lines that match include Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show lacp internal Port Mode Role Timeout Priority ---- -------- ---- ------ ------- -------- Disabled Auto Active Fast 32768 Disabled Auto Active Fast...
  • Page 204 AW-IHT-1271# show line alive Line is con 0. * You are at this line now. Alive from Console. Default privileged level is 2. Command line editing is enabled Display EXEC banner is enabled. Display Day banner is enabled. Terminal width is 80.
  • Page 205 Include lines that match <line> String to match output lines All switches or All ports GigabitEthernet 1 Gigabit Ethernet Port <port_type_list> Port list for all port types EXAMPLE AW-IHT-1271# show link-oam interface * 1/10 Interface Control Mode Status -------------------- --------- ------- ----------- GigabitEthernet...
  • Page 206 Exclude lines that match include Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show lldp med media-vlan-policy No policies defined AW-IHT-1271# logging Syslog. SYNTAX show logging <loggin_id : 1-4294967295> [ | {begin | exclude | include } <LINE>]...
  • Page 207 Exclude lines that match include Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show logging info Switch logging host mode is disabled Switch logging host address is null Switch logging level is information Number of entries: Info...
  • Page 208 GigabitEthernet All Switches or All ports Gigabitethernet 1 Gigabit Ethernet Port <port_type_list> Port list in 1/1-12 for Gigabitethernet EXAMPLE AW-IHT-1271# show loop-protect Loop Protection Configuration ====================================== Loop Protection : Enable Transmission Time : 1 sec Shutdown Time : 180 sec...
  • Page 209 Transmit mode is enabled. No loop. The number of loops is 0. Status is down. GigabitEthernet 1/2 ------------------------------ Loop protect mode is enabled. -- more --, next page: Space, continue: g, quit: ^C No loop. Mac Address Table information. SYNTAX show mac address-table [ conf | static | aging-time | { { learning | count } [ interface <port_type>...
  • Page 210 Exclude lines that match include Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show mac address-table static AW-IHT-1271# Maintenance Entity Point SYNTAX show mep [ | ( begin | exclude | include ) <line> ] show mep <range_list>...
  • Page 211 show mep ( ais | aps | bfd | cc | client | dm | lb | lck | lm | lm-avail | lst | lt | peer | pm | rt | syslog | tlv | tst ) [ | | <range_list>...
  • Page 212 Begin with the line that matches exclude Exclude lines that match include Include lines that match <line> String to match output lines EXAMPLE AW-IHT-1271# show mep tst MEP TST state is: Inst TX frame count RX frame count RX rate Test time AW-IHT-1271#...
  • Page 213 EXAMPLE AW-IHT-1271# show monitor Session 1 --------- Mode : Disabled Type : Mirror Source VLAN(s) CPU Port AW-IHT-1271# Multicast VLAN Registration configuration. SYNTAX show mvr [ vlan <vlan_list> | name <word16> ] [ group-database [ interface <port_type> <port_type_list> ] [ sfm-information ] ] [ detail ] [ | {begin | exclude | include } <LINE>]...
  • Page 214 Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show mvr vlan 10 detail MVR is currently disabled, please enable MVR to start group registration. % Invalid MVR IGMP VLAN 10. % Invalid MVR MLD VLAN 10.
  • Page 215 <LINE> String to match output lines EXAMPLE AW-IHT-1271# show platform phy Port API Inst WAN/LAN/1G Mode Duplex Speed Link ---- --------- --------- ---- ------ ----- ---- Default Default Default Default ,Yes Default Default Default Default Default Default Default Default show poe.
  • Page 216 Exclude lines that match include Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show poe status interface GigabitEthernet 1/1-2 Interface PD Class Port Status Req Pwr Alloc Power Current Priority Used [W] Used[W] Used[W] Used[mA]...
  • Page 217 AW-IHT-1271# show ntp status NTP Mode : disabled Server IP host address (a.b.c.d) or a host name string ------------------------------------------------------ AW-IHT-1271# port-security SYNTAX show port-security port [ interface <port_type> <port_type_list> ] [ | {begin | exclude | include } <LINE> show port-security switch [ interface <port_type> <port_type_list> ] [ | {begin | exclude | include } <LINE>...
  • Page 218 EXAMPLE AW-IHT-1271# show port-security port interface GigabitEthernet 1/2 GigabitEthernet 1/2 ------------------- MAC Address State Added Age/Hold Time ----------------- ---- ---------- -------------------- ------------- <none> AW-IHT-1271# privilege SYNTAX show privilege [ | {begin | exclude | include } <LINE> Parameter Output modifiers...
  • Page 219 Include lines that match <line> String to match output lines EXAMPLE AW-IHT-1271# show process load Load average(100ms, 1s, 10s): AW-IHT-1271# Precision time Protocol (1588) SYNTAX show ptp <0-3> ( clk | current | default | filter ) | ( begin | exclude | include ) <line>...
  • Page 220 show ptp <0-3> [ foreign-master-record | port-ds | port-state ] [ | | ( interface ( * | GigabitEthernet ) <port_type_list> ) ] show ptp <0-3> [ ho | local-clock | master-table-unicast | parent | servo | servo-extended | slave | slave-cfg | slave-table-unicast | time-property | uni] | ( begin | exclude | include ) <line>...
  • Page 221 Define interface list for the 'port' show commands. Default is show all interfaces. All switches or All ports GigabitEthernet 1 Gigabit Ethernet Port <port_type_list> Port list for all port types EXAMPLE AW-IHT-1271# show ptp 3 master-table-unicast ip_addr mac_addr port Ann Sync --------------- ----------------- ---- --- ----- AW-IHT-1271# pvlan PVLAN status.
  • Page 222 Begin with the line that matches exclude Exclude lines that match include Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show pvlan isolation interface GigabitEthernet 1/1-2 Port Isolation -------------------------------- --------- GigabitEthernet 1/1 Disabled GigabitEthernet 1/2 Disabled AW-IHT-1271# Quality of Service.
  • Page 223 Begin with the line that matches exclude Exclude lines that match include Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show qos storm qos storm: ========== Unicast : disabled Multicast: disabled Broadcast: disabled AW-IHT-1271# radius-server RADIUS configuration.
  • Page 224 Exclude lines that match include Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show radius-server Global RADIUS Server Timeout : 5 seconds Global RADIUS Server Retransmit : 3 times Global RADIUS Server Deadtime : 0 minutes...
  • Page 225 Exclude lines that match include Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show rapid-ring Entry Index Rapid Ring Role : Disabled Rapid Ring Port 1 Rapid Ring Port 2 Rapid Ring Port 1 State...
  • Page 226 Exclude lines that match include Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show rmon alarm AW-IHT-1271# running-config Show running system information. SYNTAX show running-config [ all-defaults ] [ | {begin | exclude | include } <LINE>...
  • Page 227 feature Show configuration for specific feature interface Show specific interface(s) line Show line settings vlan VLAN Valid words are ‘GVRP’ 'access' 'access-list' CWORD 'aggregation' 'arp-inspection' 'auth' 'clock' 'dhcp' 'dhcp-snooping' 'dns' 'dot1x' 'green-ethernet' 'http' 'icli' 'ip-igmp-snooping' 'ip-igmp-snooping-port' 'ip-igmp-snooping-vlan' 'ipmc-profile' 'ipmc-profile-range' 'ipv4' 'ipv6' 'ipv6-mld-snooping' 'ipv6-mld-snooping-port' 'ipv6-mld-snooping-vlan' ‘lacp’...
  • Page 228 Exclude lines that match include Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show running-config interface vlan 3 Building configuration... AW-IHT-1271# sflow Statistics flow.. SYNTAX show sflow [ statistics { receiver | samplers [[ <range_list> ] <port_type> <port_type_list> ] } ] [ | {begin | exclude | include } <LINE>...
  • Page 229 Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show sflow Agent Configuration: ==================== Agent Address: 127.0.0.1 Receiver Configuration: ======================= Owner : <none> Receiver : 0.0.0.0 UDP Port : 6343 Max. Datagram: 1400 bytes Time left : 0 seconds No enabled collectors (receivers).
  • Page 230 AW-IHT-1271# show smtp Mail Server User Name Password Sender Return Path Email Adress 1 : Email Adress 2 : Email Adress 3 : Email Adress 4 : Email Adress 5 : Email Adress 6 : AW-IHT-1271# snmp Display SNMP configurations.
  • Page 231 v2c security model v3 security model any security model auth authNoPriv Security Level noauth noAuthNoPriv Security Level priv authPriv Security Level community Community SNMPv3 <Community : word127> Specify community name host Set SNMP host's configurations <ConfName : word32> Name of the host configuration system System event group switch...
  • Page 232 Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show snmp SNMP Configuration SNMP Mode : enabled SNMP Version : 2c Read Community : public Write Community : private Trap Mode : disabled Trap Version SNMPv3 Communities Table:...
  • Page 233 <port_type> <port_type_list> ] } | { mst [ configuration | { <0-7> [ interface <port_type> <port_type_list> ] } ] } ] [ | {begin | exclude | include } <LINE> Parameter summary STP summary active STP active interfaces interface Choose port <port_type>...
  • Page 234 Community : private Source IP : 0.0.0.0 Source Mask : 0.0.0.0 SNMPv3 Users Table: User Name : default_user Engine ID : 800007e5017f000001 AW-IHT-1271# show spanning-tree ? Output modifiers active STP active interfaces detailed STP statistics interface Choose port Configuration summary STP summary <cr>...
  • Page 235 [ cloud-config | mobile-device-list | port-name-service ] Parameter cloud-config Show SwitchAlert Management configuration mobile-device-list Show Registered Mobile Device List port-name-service Show Port Name Service configuration EXAMPLE AW-IHT-1271# show switchalert-management cloud-config SwitchAlert Mode : disabled Server Address : ipush.cloudapp.net Server State AW-IHT-1271# switchport Display switching mode characteristics.
  • Page 236 Exclude lines that match include Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show switchport forbidden Forbidden VLAN table is empty AW-IHT-1271# tacacs-server TACACS+ configuration. SYNTAX show tacacs-server [ | {begin | exclude | include } <LINE>...
  • Page 237 SYNTAX show system Parameter None EXAMPLE AW-IHT-1271# show system Model Name System Description Location Contact System Name System Date : 2011-01-01T07:54:13+00:00 System Uptime : 07:54:14 Bootloader Version : v1.15f Firmware Version : v7.10.1049 2017-04-11 Hardware Version : v1.01...
  • Page 238 Exclude lines that match include Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show terminal Line is con 0. * You are at this line now. Alive from Console. Default privileged level is 2. Command line editing is enabled Display EXEC banner is enabled.
  • Page 239 String to match output lines All switches or All ports GigabitEthernet 1 Gigabit Ethernet Port <port_type_list> Port list for all port types EXAMPLE AW-IHT-1271# show udld interface GigabitEthernet 1/1-3 GigabitEthernet 1/1 ---------------------------------------------------------------------- UDLD Mode : Disable Admin State : Disable...
  • Page 240 ---------------------------------------------------------------------- UDLD Mode : Disable Admin State : Disable Message Time Interval(Sec): 7 Device ID(local) : 00-00-8C-78-91-23 Device Name(local) : AW-IHT-1271 Bidirectional state : Indeterminant No neighbor cache information stored --------------------- GigabitEthernet 1/3 ---------------------------------------------------------------------- UDLD Mode : Disable Admin State...
  • Page 241 Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show upnp UPnP Mode : Disabled UPnP TTL UPnP Advertising Duration : 100 AW-IHT-1271# user-privilege Users privilege configuration SYNTAX show user-privilege EXAMPLE AW-IHT-1271# show user-privilege username admin privilege 15 password none...
  • Page 242 Include lines that match <LINE> String to match output lines EXAMPLE AW-IHT-1271# show user myself Line is vty 0. * You are at this line now. Connection is from 192.168.10.119:4123 by Telnet. User name is admin. Privilege is 15.
  • Page 243 Alternate Image --------------- Image : managed.bk Version Date ------------------ SID : 1 ------------------ Chipset ID : VSC0 Board Type : AW-IHT-1271 Port Count : 26 Product : Vitesse AW-IHT-1271 Switch Software Version : AW-IHT-1271 (standalone) v6.02 Build Date : 2016-09-30T13:35:25+08:00 AW-IHT-1271#...
  • Page 244 vlan VLAN status. SYNTAX show vlan [ id <vlan_list> | name <vword32> | brief ] show vlan protocol [ eth2 { <0x600-0xffff> | arp | ip | ipx | at } ] [ snap { <0x0-0xffffff> | rfc_1042 | snap_8021h } <0x0-0xffff>...
  • Page 245 Show the VLANs configured by Voice VLAN. interface Show the VLANs configured for a specific interface(s). <port_type > GigabitEthernet Gigabitethernet 1 Gigabit Ethernet Port <port_type_list> Port list in 1/1-12 for Gigabitethernet EXAMPLE AW-IHT-1271# show vlan VLAN Name Interfaces ---- -------------------------------- ---------- default Gi 1/1-12 AW-IHT-1271#...
  • Page 246 voice Voice appliance attributes. SYNTAX show voice vlan [ oui <oui> | interface <port_type> <port_type_list> ] [ | {begin | exclude | include } <LINE> Parameter vlan Vlan for voice traffic OUI configuration <oui> OUI value interface Select an interface to configure <port_type>...
  • Page 247 AW-IHT-1271# show voice vlan Switch voice vlan is disabled Switch voice vlan ID is 1000 Switch voice vlan aging-time is 86400 seconds Switch voice vlan traffic class is 7 Telephony OUI Description ------------- ----------- 00-01-E3 Siemens AG phones 00-03-6B Cisco phones...
  • Page 248 Valid words are 'Aggregation' ‘DHCP’ 'Debug' 'Dhcp_Client' ‘Diagnostics’ CWORD ‘EEE’ ‘GARP’ ‘GVRP’ 'Green_Ethernet' 'IP2' 'IPMC_Snooping' 'LACP' 'LLDP' 'Loop_Protect' 'MAC_Table' 'MVR' 'Maintenance' 'Mirroring' 'NTP' 'POE' 'Ports' 'Private_VLANs' 'QoS' 'RPC' 'Security' 'Spanning_Tree' 'System' 'Timer' 'UPnP' 'VCL' 'VLANs' 'Voice_VLAN' ‘XXRP’ ‘sFlow’ 'sFlow' level Web privilege group level Output modifiers begin...
  • Page 249 AW-IHT-1271# show web privilege group level Group Name Privilege Level CRO CRW SRO SRW -------------------------------- --- --- --- --- ACTIVATE 5 10 5 10 Aggregation 5 10 5 10 cloud_management 5 10 5 10 Debug 15 15 15 15 DHCP...

  • Page 251: Terminal Of Cli

    TERMINAL of CLI Set terminal line parameters Syntax terminal editing terminal exec-timeout <0-1440> [ <0-3600> ] terminal help terminal history size <0-32> terminal length <0 or 3-512> terminal width <0 or 40-512> Parameter editing Enable command line editing exec-timeout Set the EXEC timeout help Description of the interactive help system history...
  • Page 252 AW-IHT-1271# terminal help Help may be requested at any point in a command by entering a question mark '?'. If nothing matches, the help list will be empty and you must backup until entering a '?' shows the available options.

  • Page 253: Traceroute Of Cli

    Specify max TTL wait Specify wait time EXAMPLE AW-IHT-1271# traceroute ip 22 nqueries 3 protocol icmp ttl 3 wait 3 traceroute to 22 (0.0.0.22), 3 hops max, 140 byte packets 1 * * * 2 * * * 3 * * *...
  • Page 254 20 CLI COMMAND REFERENCEs This chapter introduces the CLI privilege level and command modes. The privilege level determines whether or not the user could run the particular commands  If the user could run the particular command, then the user has to run the command in the ...

  • Page 255: Command Summary

    Command Summary COMMAND DESCRIPTION show access management Use the show access management user EXEC EXEC command without keywords to display the access management configuration, or use the statistics keyword to display statistics, or use the <AccessId> keyword to display the specific access management entry.
  • Page 256 interface configuration will affect the received frames if it doesn't match any ACE. access-list rate-limiter <1-16> Use the access-list rate-limiter interface INTERFACE_PORT_LIST configuration command to configure the access-list rate-limiter ID . The access-list interface configuration will affect the received frames if it doesn't match any ACE.
  • Page 257 access-list shutdown Use the access-list shutdown interface INTERFACE_PORT_LIST configuration command to enable access-list shutdown. Use the no form of this command to disable access-list shutdown. The access-list interface configuration will affect the received frames if it doesn't match any ACE. access-list evc-policer <1-256>...
  • Page 258 <1-32767> | kpps access-list rate-limiter. <1,2,4,8,16,32,64,128,256,512,1024> | 100kbps <0-10000> } default access-list rate-limiter [ <1~16> ] Use the default access-list rate-limiter GLOBAL_CONFIG global configuration command to restore the default setting of access-list rate-limiter. access-list ace [update] <1-256> [next Use the access-list ace global GLOBAL_CONFIG {<1-256>|last}] [ingress {switch configuration command to set the...
  • Page 259 ipv4-tcp [sip {<ipv4_subnet>|any}] [dip {<ipv4_subnet>|any}] [sport {<0-65535> [to <0-65535>]|any}] [dport {<0-65535> [to <0-65535>]|any}] [ip-flag [ip-ttl {<0-1>|any}] [ip-options {<0-1>|any}] [ip-fragment {<0-1>|any}]] [tcp-flag [tcp-fin {<0-1>|any}] [tcp-syn {<0-1>|any}] [tcp-rst {<0-1>|any}] [tcp-psh {<0-1>|any}] [tcp-ack {<0-1>|any}] [tcp-urg {<0-1>|any}]]| ipv6 [next-header {<0-5,7-16,18-57,59-255>|any}] [sip {<ipv6_addr> [sip-bitmask <uint>]|any}] [hop-limit {<0-1>|any}]| ipv6-icmp [sip {<ipv6_addr>...
  • Page 260 interface for the access-list interface configuration, or use the rate-limiter keyword to display access-list rate-limiter configuration, or use the ace keyword to display access-list ace configuration. clear access-list ace statistics Use the clear access-list ace statistics EXEC privileged EXEC command to clear the statistics maintained by access-list, including access-list interface statistics and ACE's statistics.
  • Page 261 permit | all } no ip arp inspection vlan <vlan_list> logging GLOBAL_CONFIG ip arp inspection entry interface <port_type_id> GLOBAL_CONFIG <vlan_id> <mac_ucast> <ipv4_ucast> arp_inspection_translate GLOBAL_CONFIG arp_inspection_port_mode Use the ip arp inspection trust interface INTERFACE_PORT_LIST configuration command to configure a port as trusted for ARP inspection purposes.
  • Page 262 value. no radius-server timeout Use the no radius-server timeout GLOBAL_CONFIG command to reset the global RADIUS timeout value to default. radius-server retransmit <1-1000> Use the radius-server retransmit GLOBAL_CONFIG command to configure the global RADIUS retransmit value. no radius-server retransmit Use the no radius-server retransmit GLOBAL_CONFIG command to reset the global RADIUS retransmit value to default.
  • Page 263 tacacs-server deadtime <1-1440> Use the tacacs-server deadtime GLOBAL_CONFIG command to configure the global TACACS+ deadtime value. no tacacs-server deadtime Use the no tacacs-server deadtime GLOBAL_CONFIG command to reset the global TACACS+ deadtime value to default. tacacs-server key <line1-63> Use the tacacs-server key command to GLOBAL_CONFIG configure the global TACACS+ key.
  • Page 264 clock summer-time <word16> date [<1-12> GLOBAL_CONFIG <1-31> <2000-2097> <hhmm> <1-12> <1-31> <2000-2097> <hhmm> [<1-1440>]] no clock summer-time GLOBAL_CONFIG clock timezone <word16> <-23-23> [<0-59>] GLOBAL_CONFIG no clock timezone GLOBAL_CONFIG show clock detail EXEC show ip dhcp detailed statistics { server | client | Use the show ip dhcp detailed statistics EXEC snooping | relay | normal-forward | combined }...
  • Page 265 ip helper-address <ipv4_ucast> Use the ip helper-address global GLOBAL_CONFIG configuration command to configure the host address of DHCP relay server. no ip helper-address Use the no ip helper-address global GLOBAL_CONFIG configuration command to clear the host address of DHCP relay server. ip dhcp relay information option Use the ip dhcp relay information option GLOBAL_CONFIG...
  • Page 266 show ip dhcp pool counter [<word32>] debug EXEC show ip dhcp excluded-address EXEC show ip dhcp server binding [ state {allocated | EXEC committed | expired} ] [ type {automatic | manual | expired} ] show ip dhcp server binding <ipv4_ucast> EXEC show ip dhcp server EXEC...
  • Page 267 [<ipv4_ucast> [<ipv4_ucast>]]] no netbios-name-server DHCP_POOL netbios-node-type { b-node | h-node | m-node | DHCP_POOL p-node } no netbios-node-type DHCP_POOL netbios-scope <line128> DHCP_POOL no netbios-scope DHCP_POOL nis-domain-name <word128> DHCP_POOL no nis-domain-name DHCP_POOL nis-server <ipv4_ucast> [<ipv4_ucast> DHCP_POOL [<ipv4_ucast> [<ipv4_ucast>]]] no nis-server DHCP_POOL host <ipv4_ucast>...
  • Page 268 <port_type_list> ] privileged EXEC command to clear the statistics maintained by IP DHCP snooping, or particularly the IP DHCP snooping statistics for the interface. ip dhcp snooping Use the ip dhcp snooping global GLOBAL_CONFIG configuration command to globally enable DHCP snooping. Use the no form of this command to globally disable DHCP snooping.
  • Page 269 to the lowest speed to default. green-ethernet fan temp-max <-127-127> Sets temperature where the fan must be GLOBAL_CONFIG running at full speed. no green-ethernet fan temp-max Sets temperature at which the fan shall GLOBAL_CONFIG be running at full speed to default. green-ethernet led interval <0~24>...
  • Page 270 configuration command to enable the secure HTTP web redirection. When the secure HTTP web server is enabled, the feature automatic redirect the none secure HTTP web connection to the secure HTTP web connection. Use the no form of this command to disable the secure HTTP web redirection.
  • Page 271 ip route <ipv4_addr> <ipv4_netmask> Add new IP route GLOBAL_CONFIG <ipv4_addr> no ip route <ipv4_addr> <ipv4_netmask> Delete an existing IP route GLOBAL_CONFIG <ipv4_addr> show interface vlan [<vlan_list>] Vlan interface status EXEC show ip interface brief Brief IP interface status EXEC show ip arp Print ARP table EXEC clear ip arp...
  • Page 272 [ group-database [ interface <port_type_list> ] [ sfm-information ] ] [ detail ] ip igmp snooping GLOBAL_CONFIG ip igmp unknown-flooding GLOBAL_CONFIG ip igmp host-proxy [ leave-proxy ] GLOBAL_CONFIG ip igmp ssm-range <ipv4_mcast> <4-32> GLOBAL_CONFIG no ip igmp ssm-range GLOBAL_CONFIG ip igmp snooping vlan <vlan_list> GLOBAL_CONFIG no ip igmp snooping vlan [ <vlan_list>...
  • Page 273 ipv6 mld unknown-flooding GLOBAL_CONFIG ipv6 mld host-proxy [ leave-proxy ] GLOBAL_CONFIG ipv6 mld ssm-range <ipv6_mcast> <8-128> GLOBAL_CONFIG no ipv6 mld ssm-range GLOBAL_CONFIG ipv6 mld snooping vlan <vlan_list> GLOBAL_CONFIG no ipv6 mld snooping vlan [ <vlan_list> ] GLOBAL_CONFIG ipv6 mld snooping immediate-leave INTERFACE_PORT_LIST ipv6 mld snooping mrouter INTERFACE_PORT_LIST...
  • Page 274 ip verify source GLOBAL_CONFIG i ip verify source INTERFACE_PORT_LIST ip verify source limit <0-2> INTERFACE_PORT_LIST no ip verify source limit INTERFACE_PORT_LIST ip verify source translate GLOBAL_CONFIG show ip verify source [interface <port_type_list>] EXEC show ip source binding [ dhcp-snooping | static ] EXEC [interface <port_type_list>] ip source binding interface <port_type_id>...
  • Page 275 lldp transmit Sets if switch shall transmit LLDP INTERFACE_PORT_LIST frames. lldp receive Sets if switch shall update LLDP entry INTERFACE_PORT_LIST table with incoming LLDP information. show lldp neighbors [ interface <port_type_list> ] Shows the LLDP neighbors information. EXEC show lldp statistics [ interface <port_type_list> ] Shows the LLDP statistics information.
  • Page 276 building | apartment | floor | room-number | place-type | postal-community-name | p-o-box | additional-code } <string250> no lldp med location-tlv civic-addr { country | state | GLOBAL_CONFIG county | city | district | block | street | leading-street-direction | trailing-street-suffix | street-suffix | house-no | house-no-suffix | landmark | additional-info | name | zip-code | building | apartment | floor | room-number |...
  • Page 277 no lldp med media-vlan-policy <0~31> GLOBAL_CONFIG lldp med media-vlan policy-list <range_list> Use the media-vlan policy-list to assign INTERFACE_PORT_LIST policy to the interface. loop-protect Loop protection configuration GLOBAL_CONFIG loop-protect transmit-time <1-10> Loop protection transmit time interval GLOBAL_CONFIG no loop-protect transmit-time GLOBAL_CONFIG loop-protect shutdown-time <0-604800>...
  • Page 278 debug kr-conf [ cm1 <-32-31> ] [ c0 <-32-31> ] debug INTERFACE_PORT_LIST [ cp1 <-32-31> ] [ ampl <300-1275> ] [ { ps25 | ps35 | ps55 | ps70 | ps120 } ] [ en-ob | dis-ob ] [ ser-inv | ser-no-inv ] show spanning-tree [ summary | active | { interface EXEC <port_type_list>...
  • Page 279 auto } no spanning-tree link-type INTERFACE_PORT_LIST spanning-tree restricted-role INTERFACE_PORT_LIST spanning-tree restricted-tcn INTERFACE_PORT_LIST spanning-tree bpdu-guard INTERFACE_PORT_LIST spanning-tree mst <0-7> cost { <1-200000000> | INTERFACE_PORT_LIST auto } no spanning-tree mst <0-7> cost INTERFACE_PORT_LIST spanning-tree mst <0-7> port-priority <0-240> INTERFACE_PORT_LIST no spanning-tree mst <0-7> port-priority INTERFACE_PORT_LIST spanning-tree STP_AGGR...
  • Page 280 mvr vlan <vlan_list> mode { dynamic | compatible } GLOBAL_CONFIG mvr name <word16> mode { dynamic | GLOBAL_CONFIG compatible } no mvr vlan <vlan_list> mode GLOBAL_CONFIG no mvr name <word16> mode GLOBAL_CONFIG mvr vlan <vlan_list> igmp-address <ipv4_ucast> GLOBAL_CONFIG mvr name <word16> igmp-address <ipv4_ucast> GLOBAL_CONFIG no mvr vlan <vlan_list>...
  • Page 281 no dot1x timeout tx-period GLOBAL_CONFIG dot1x authentication timer inactivity <10-1000000> Time in seconds between check for GLOBAL_CONFIG activity on successfully authenticated MAC addresses. no dot1x authentication timer inactivity GLOBAL_CONFIG dot1x timeout quiet-period <10-1000000> Time in seconds before a MAC-address GLOBAL_CONFIG that failed authentication gets a new authentication chance.
  • Page 282 frame has not been received on the port for the life-time of the port. If enabled (checked), the switch will consider entering the Guest VLAN even if an EAPOL frame has been received on the port for the life-time of the port. dot1x radius-qos Enables/disables per-port state of INTERFACE_PORT_LIST...
  • Page 283 debug phy reset debug INTERFACE_PORT_LIST debug phy gpio <0-13> mode debug INTERFACE_PORT_LIST {output|input|alternative} debug phy gpio <0-13> get debug INTERFACE_PORT_LIST show poe [ interface <port_type_list> ] Use the show poe to show PoE status. EXEC poe mode { standard | plus } Use poe mode to configure of PoE INTERFACE_PORT_LIST mode.
  • Page 284 poe hour <0-23> This command is used to set hour time INTERFACE_PORT_LIST per week to enable PoE. no poe hour <0-23> This command is used to set hour time INTERFACE_PORT_LIST per week to disable PoE. poe Sun This command is used to set hour time INTERFACE_PORT_LIST on Sunday to enable PoE.
  • Page 285 show interface <port_type_list> status Display status for the interface. EXEC Use mtu to specify maximum frame size INTERFACE_PORT_LIST <'VTSS_MAX_FRAME_LENGTH_STANDARD'-'V (1518-9600 bytes). TSS_MAX_FRAME_LENGTH_MAX'> no mtu Use no mtu to set maximum frame size INTERFACE_PORT_LIST to default. shutdown Use shutdown to shutdown the INTERFACE_PORT_LIST interface.
  • Page 286 port-security aging Enable/disable port security aging. GLOBAL_CONFIG port-security aging time <10-10000000> Time in seconds between check for GLOBAL_CONFIG activity on learned MAC addresses. no port-security aging time GLOBAL_CONFIG port-security Enable/disable port security per INTERFACE_PORT_LIST interface. port-security maximum [<1-1024>] Maximum number of MAC addresses INTERFACE_PORT_LIST that can be learned on this set of interfaces.
  • Page 287 no qos map cos-dscp <0~7> dpl <0~1> GLOBAL_CONFIG qos map dscp-egress-translation { <0~63> | GLOBAL_CONFIG <dscp> } <0~1> to { <0-63> | <dscp> } no qos map dscp-egress-translation { <0~63> | GLOBAL_CONFIG <dscp> } <0~1> qos wred queue <0~5> min-th <0-100> mdp-1 GLOBAL_CONFIG <0-100>...
  • Page 288 default } ] [ dpl { <0-1> | default } ] [ pcp-dei { <0-7> <0-1> | default } ] [ dscp { <0-63> | <dscp> | default } ] [ policy { <uint> | default } ] }*1 ] no qos qce <'QCE_ID_START'~'QCE_ID_END'>...
  • Page 289 no qos dscp-classify INTERFACE_PORT_LIST qos dscp-remark { rewrite | remap | remap-dp } INTERFACE_PORT_LIST no qos dscp-remark INTERFACE_PORT_LIST qos storm { unicast | broadcast | unknown } INTERFACE_PORT_LIST <100-13200000> [ fps ] no qos storm { unicast | broadcast | unknown } INTERFACE_PORT_LIST qos qce { [ addr { source | destination } ] [ key INTERFACE_PORT_LIST...
  • Page 290 no rmon collection history <1-65535> INTERFACE_PORT_LIST show sflow statistics { receiver [ <range_list> ] | Use sflow statistics to show statistics for EXEC samplers [interface [<range_list>] either receiver or sample interface. <port_type_list>]} show sflow Use show sflow to display the current EXEC sFlow configuration.
  • Page 291 no sflow max-datagram-size [receiver Maximum datagram size. GLOBAL_CONFIG <range_list>] sflow sampling-rate [sampler <range_list>] Specifies the statistical sampling rate. INTERFACE_PORT_LIST [<1-4294967295>] The sample rate is specified as N to sample 1/Nth of the packets n the monitored flows. There are no restrictions on the value, but the switch will adjust it to the closest possible sampling rate.
  • Page 292 snmp-server engine-id local <word10-32> To specify SNMP server's engine ID. GLOBAL_CONFIG no snmp-server engined-id local To set SNMP server's engine ID to GLOBAL_CONFIG default value. snmp-server version { v1 | v2c | v3 } Set the SNMP server version to GLOBAL_CONFIG SNMPv1, SNMPv2c or SNMPv3.
  • Page 293 user EXEC command to \ display the SNMP ifIndex(defined in IF-MIB) mapping \ information in the switch. show snmp mib redefine Use the show snmp mib redefine user EXEC EXEC command to display \ the redefined MIBs in the switch, that are different \ definitions from the standard MIBs.
  • Page 294 command to disable the SSH. show network-clock Show selector state. EXEC clear network-clock clk-source <range_list> Clear active WTR timer. EXEC network-clock clk-source <range_list> nominate Nominate a clk input to become a GLOBAL_CONFIG { clk-in | {interface <port_type_id>} } selectable clock source. no network-clock clk-source <range_list>...
  • Page 295 ssm-overwrite { prc | ssua | ssub | eec2 | eec1 | dnu } no network-clock clk-source <range_list> GLOBAL_CONFIG ssm-overwrite network-clock option { eec1 | eec2 } EEC options GLOBAL_CONFIG no network-clock option GLOBAL_CONFIG network-clock synchronization ssm SSM enable/disable. INTERFACE_PORT_LIST show logging [ info ] [ warning ] [ error ] [ switch Use the show logging privileged EXEC EXEC...
  • Page 296 for the local switch access. password encrypted <word4-44> Use the password encrypted GLOBAL_CONFIG <password> global configuration command to configure administrator password with encrypted password for the local switch access. password none Use the password none global GLOBAL_CONFIG configuration command to remove the administrator password.
  • Page 297 switch access. username <word31> privilege <0-15> password Use the username <username> GLOBAL_CONFIG encrypted <word4-44> privilege <level> password encrypted <password> global configuration command to add a user with encrypted password for the local switch access. username <word31> privilege <0-15> password Use the username <username> GLOBAL_CONFIG none privilege <level>...
  • Page 298 command to configure a port to a VLAN. Valid VLAN IDs are 1 to 4095. no switchport access vlan INTERFACE_PORT_LIST switchport trunk native vlan <vlan_id> Use the switchport native vlan command INTERFACE_PORT_LIST to configure a port VLAN ID for a trunk port.
  • Page 299 show interface <port_type_list> switchport [access Use the how interfaces command to EXEC | trunk | hybrid] display the administrative and operational status of all interfaces or a specified interface. show vlan [id <vlan_list> | name <vword32> | brief] Use the show vlan command to view the EXEC VLAN configuration.
  • Page 300 configuration command to restore the default voice vlan class. voice vlan oui <oui> [description <line32>] Use the voice vlan oui global GLOBAL_CONFIG configuration command to set the oui entry for voice vlan. no voice vlan oui <oui> Use the no voice vlan oui global GLOBAL_CONFIG configuration command to delete the oui entry.
  • Page 301 debug gvrp msti debug EXEC debug gvrp statistic debug EXEC gvrp GLOBAL_CONFIG gvrp time { [ join-time <1-20> ] [ leave-time GLOBAL_CONFIG <60-300> ] [ leave-all-time <1000-5000> ] }*1 gvrp max-vlans <1-4095> GLOBAL_CONFIG gvrp INTERFACE_PORT_LIST gvrp join-request vlan <vlan_list> INTERFACE_PORT_LIST gvrp leave-request vlan <vlan_list>...

  • Page 302: Veriphy Of Cli

    VERIPHY of CLI VeriPHY keyword Syntax veriphy veriphy interface [ * | GigabitEthernet ] <port_type_list> Parameter interface Interface keyword All switches or All ports GigabitEthernet 1 Gigabit Ethernet Port <port_type_list> Port list for all port types <port_type_list> Port list in 1/1-12 EXAMPLE...
  • Page 303 No test results GigabitEthernet 1/11 No test results GigabitEthernet 1/12 No test results AW-IHT-1271# veriphy interface GigabitEthernet 1/1 Starting VeriPHY - Please wait Interface Pair A Length Pair B, Length Pair C Length Pair D Length ---------------------- ------ ------ -------------- ------ ------...

Table of Contents