Cli Configuration - Vivotek AW-IHT-1270 User Manual

2. If AUTO_PROVISION_VER is biggest than current auto provision version, do step 3;
otherwise, wait 24 hours and go back to step 1.
3. If the Firmware_Upgrade_State =1, do step 4; otherwise, do step 6.
4. If the Firmware_Version is difference than current firmware version, download the
Firmware_Image_File and upgrade firmware.
5. If upgrade firmware succeeded and Firmware_Reboot=1, let reboot_flag=1.
6. If the Global_Configuration_State =1, download the Global_Configuration_File and
upgrade configuration; otherwise, do step 8.
7. If upgrade configutation succeeded and Global_Configuration_Reboot =1, let
reboot_flag=1.
8. If the Specific_Configuration_State =1, download the specific configuration file and
upgrade configuration; otherwise do step 10. The naming is "Model_Name _" with 12-bit
MAC digits ,example for following is "AW-IHT-1270_00e04c8196b9.txt"
9. If upgrade configutation succeeded and Specific_Configuration_Reboot =1, let
reboot_flag=1.
10. If reboot_flag=1, save running configuration and reboot the switch; otherwise, wait 24
hours and go back to step 1.
Default Settings
Auto provision configuration profile:
Active
Version
Protocol
FTP user/pwd
Folder
Server address
9.2.2.

CLI Configuration

Node
show auto-provision
enable
configure auto-provision
show
auto-provision
active
auto-provision
(enable|disable)
server-address
auto-provision
: Disable
: 0
: FTP
: /
:
:
Command
This command displays the current auto provision
configurations.
This command enters the auto-provision node.
This command displays the current auto provision
configurations.
This command enables/disables the auto provision
function.
This command configures the auto provision
Description
208