Management Host; Introduction - Vivotek AW-IHT-1270 User Manual

Daylight Saving Settings
State
Start Date
End Date
Apply
Refresh
5.1.4.

Management Host

5.1.4.1. Introduction

The feature limits the hosts which can manage the Switch. That is, any hosts can manage the
Switch via telnet or web browser. If user has configured one or more management host, the
Switch can be managed by these hosts only. The feature allow user to configure management IP
up to 3 entries.
from the drop-down list box.
Select Enable if you want to use Daylight Saving Time. Otherwise,
select Disable to turn it off.
Configure the day and time when Daylight Saving Time starts if you
enabled Daylight Saving Time. The time is displayed in the 24 hour
format. Here are a couple of examples:
Daylight Saving Time starts in most parts of the United States on the
second Sunday of March. Each time zone in the United States starts
using Daylight Saving Time at 2 A.M. local time. So in the United States
you would select Second, Sunday, March and 2:00.
Daylight Saving Time starts in the European Union on the last Sunday
of March. All of the time zones in the European Union start using
Daylight Saving Time at the same moment (1 A.M. GMT or UTC). So
in the European Union you would select Last, Sunday, March and the
last field depends on your time zone. In Germany for instance, you
would select 2:00 because Germany's time zone is one hour ahead of
GMT or UTC (GMT+1).
Configure the day and time when Daylight Saving Time ends if you
enabled Daylight Saving Time. The time field uses the 24 hour format.
Here are a couple of examples:
Daylight Saving Time ends in the United States on the last Sunday of
October. Each time zone in the United States stops using Daylight
Saving Time at 2 A.M. local time. So in the United States you would
select First, Sunday, November and 2:00.
Daylight Saving Time ends in the European Union on the last Sunday
of October. All of the time zones in the European Union stop using
Daylight Saving Time at the same moment (1 A.M. GMT or UTC). So
in the European Union you would select Last, Sunday, October and
the last field depends on your time zone. In Germany for instance, you
would select 2:00 because Germany's time zone is one hour ahead of
GMT or UTC (GMT+1).
Click Apply to take effect the settings.
Click Refresh to begin configuring this screen afresh.
24