Vivotek AW-IHT-1270 User Manual page 222

Upload / Download Configurations to /from a your server
Follow the steps below to save the configuration file to your PC.
 Select the "Press "Download" to save configurations file to your PC".
 Click the "Download" button to start the process.
Follow the steps below to load the configuration file from your PC to the Switch.

Select the "Upload configurations file to your Switch".

Select the full path to your configuration file.

Click the Upload button to start the process.
Reset the factory default settings of the Switch
Press the Reset button to set the settings to factory default configurations.
The configuration status
Display the configuration status of recorded in the NV-RAM.
Notice:
If the user has changed any configurations, the message displays "The configurations have been
modified!" Otherwise, the message "The configurations are default values."
There are two conditions will change message from "The configurations have been modified!"
to "The configurations are default values."
Click "Reset configuration" in web management or do cli command, reload default-
1.
config.
Click "Upload configuration" in web management or do cli command, "archive
2.
download-config xxx".
Firmware
Type the path and file name of the firmware file you wish to upload to the Switch in the File
path text box or click Browse to locate it. Click Upgrade to load the new firmware.
214