Table of Contents
Advertisement
L2SWITCH(config-if)#ip address default-gateway 172.20.1.1
L2SWITCH(config-if)#management vlan 1
Enable the DHCP client function for the switch.
L2SWITCH#configure terminal
L2SWITCH(config)#interface eth0
L2SWITCH(config-if)#ip dhcp client enable
L2SWITCH#show config-change-status
The user configuration file is default.
The configurations have been modified.
9.4.2.
Web Configuration
Save Configurations
Press the Save button to save the current settings to the NV-RAM (flash).
213
Advertisement
Table of Contents
Need help?
Do you have a question about the AW-IHT-1270 and is the answer not in the manual?
Questions and answers