Table of Contents
Advertisement
Directions for use
4.2.3 Changing the water
For optimum washing results, it is important that the water be changed frequently.
For normally soiled items, the washing water should be changed after around 30
washes. Always change the water in the event of foam problems in the tank.
Machines without an emptying pump
•
Check that the knob (1) is in position (3).
•
Open the door.
•
Remove tank filters (7) and the cover plate (12).
•
Empty the machine by removing the level pipe (11).
•
When the tank is empty, refit the level pipe (11), the tank filters (7) and the
cover plate (12).
•
Close the door and the machine will refill.
Machines with an emptying pump
Note: The door must be open when the drain pump is running.
•
Open the door.
•
Remove tank filters (8), the cover plate (13) and the level pipe (12).
•
Turn the knob (1) towards the symbol (3), wait for 3 seconds, proceed to
the symbol (5) and keep it there until the drain pump starts and runs for 2
minutes and 20 seconds.
•
When the machine is empty, refit the level pipe (12), the tank filters (8) and
the cover plate (13).
•
Turn the knob (1) first to position 0 and then to position (3).
•
Close the door and the machine will refill.
WD-4C
22
Rev. 3.0 (201308)
Hide quick links:
Advertisement
Table of Contents
