Detergent And Drying Agent; Operation; Hot Water; Risk Of Crushing - Wexiodisk WD-4C Installation And User Manual

Safety instructions

2.4 Detergent and drying agent

2.5 Operation

2.5.1 Hot water

2.5.2 Risk of crushing

2.6 Cleaning the machine

2.6.1 Cleaning with high-pressure washing

2.6.2 Outside the machine

Only detergent and drying agent intended for industrial dishwashing machines
are to be used. Washing-up liquid must not be used in the machine or for pre-
treating items (soaking, pre-washing, etc.). Contact your detergent supplier re-
garding the selection of a suitable detergent.
Be aware of the risk of handling washing and drying agents. Protective gloves and
goggles should be used when handling machine dishwashing detergent. Read
the warning text on the detergent and drying agent containers as well as the reg-
ulations of the detergent supplier.
The temperature of the washing and rinsing water is 60° C and 85° C. Do not open
the door until the washing and rinsing phase is finished.
Be careful when closing the door to avoid crush damage.
The temperature of the water in the tank is approx. 60° C and contains detergent.
Be careful when emptying and cleaning the machine. Use protective gloves.
High-pressure washing must not be used for washing the inside or outside of the
machine.
In order to satisfy current requirements, electrical components of approved enclo-
sure classes are used. There is no enclosure class capable of withstanding high
pressure.
Pressure washers and hoses must not be used to wash the outside of the ma-
chine. Water can penetrate into the electrical cabinet and the control panel and
damage the equipment, which may affect the safety of the machine.
WD-4C
4
Rev. 3.0 (201308)