Safety Instructions; General; Transport; Installation - Wexiodisk WD-4C Installation And User Manual

Safety instructions

2. Safety instructions

2.1 General

The machine is CE marked, which means that the machine complies with the re-
quirements of the EU machinery directive with regards to product safety. Product
safety means the machine has a design which prevents personal injury or dam-
age to property.
Modification to the equipment without the approval of the manufacturer invali-
dates the manufacturer's product liability.
To further improve safety during installation, operation and service, the operator
and personnel responsible for installation and servicing of the machine should
read through the safety instructions carefully.
Switch off the appliance immediately in the event of failure or malfunction. Only
trained technicians may service the machine. Regular checks, as mentioned in
the manual, should be carried out as per the instructions. The machine should be
serviced by a person authorised to do so by the manufacturer. Use original spare
parts. Contact an authorised service company to draw up a programme for pre-
ventative care. Dangerous situations may arise if the above is not followed.
Before using the machine, ensure that personnel are given the requisite training
in handling and care of the machine.

2.2 Transport

Handle the machine with care during unloading and transport to avoid tipping.
Never lift or move the machine without the wooden packaging supporting the
stand.

2.3 Installation

The electrical cabinet may only be opened by a qualified electrician or trained per-
sonnel. The machine is sensitive to electrostatic discharge (ESD), which is why a
static electricity bracelet must be used when handling the electronics.
Connection of water pipes must only be carried out by authorised personnel.
Connection of water pipes must be carried out in a manner that complies with the
regulations of the local water supply authority. Check the tightness of the water
connections before operating the machine.
Make sure that the mains voltage is the same as that indicated on the machine's
rating plate. The machine should be connected to a lockable main switch.
WD-4C
3
Rev. 3.0 (201308)