Making The Ptp 600 Series Bridge Pidu Plus Connection At The Odu - Motorola PTP 600 Series User Manual

7.7.3

Making the PTP 600 Series Bridge PIDU Plus Connection At The ODU

The following procedure describes how connection is made at the ODU. It is often easier to
carry out this procedure on the ground or a suitable surface prior to mounting the ODU.
Ensure that no power is connected to the PIDU Plus or present on the cable before
connecting the ODU.
Step 1: Assemble the cable as described in Step 2: Insert the RJ45 connector making
5.7.1 above sure that the locking tab snaps home
Step 3: Screw in the body of the weather
Step 4: Screw on the clamping nut and tighten
proofing gland and tighten
56