Avaya C360 Manager User Manual page 195

The following table provides a list of the fields in the IP Multicast Filtering
dialog box and their descriptions:
To change the IP Multicast filtering configuration for the Avaya C360
Device, change the IP Multicast filtering parameters.
To apply the changes, click
To refresh the information in the IP Multicast Filtering dialog box, click
Refresh
Avaya C360 Manager User Guide
Table 13-1. IP Multicast Filtering Parameters
Field
Filtering Mode
Host Aging Time
Router Aging Time
Delay Time
.
Description
The mode of operation of the IP Multicast
Filtering on the device. Possible Modes are:
• Enable - IP Multicast Filtering is enabled
on the device.
• Disable - IP Multicast Filtering in not
enabled on the device.
The amount of time (in seconds) allowed to
pass from a router's last IP Multicast request
before the device stops forwarding all multicast
sessions to a router. The valid range for this
parameter is 30 - 7200 seconds.
The amount of time (in seconds) allowed to
pass from a remote router's last IP Multicast
request before the local router's multicast
routing table stops forwarding all multicast
sessions to the remote router. The valid range
for this parameter is 30 - 7200 seconds.
The amount of time (in seconds) the device
waits from receiving a request for a new IP
Multicast session until IP Multicast filtering
begins. This time allows other hosts to report to
the device. The valid range for this parameter is
1 - 300 seconds.
Apply .
IP Multicast Filtering
181