Viewing Channel Group Information; Channel Group - Ppp Session Information - Avaya C360 Manager User Manual

Chapter 7

Viewing Channel Group Information

The Channel Group dialog box contains provide information specific to a
selected Channel Group. The tabs that appear in the Channel Group
dialog box are dependant on the encapsulation method of the selected
Channel Group.
To view the Channel Group dialog box for a specific Channel Group:
* Note: Clicking

Channel Group - PPP Session Information

The Channel Group dialog box for Channel Groups using PPP Sessions
contains three tabs:
84
Table 7-1. E1/T1 Port Configuration Parameters (Continued)
Field
Loopback status
Fault Messages
1. Click a Channel Group symbol in the Chassis View. A list of
Channel Groups appears.
2. Click the Channel Group for which you want to view information.
The Channel Group dialog box for the selected Channel Group
opens.
New
creation of a new Channel Group on the selected port. For
information about the Channel Group Wizard, refer to
Channel Group Wizard" on page
• Channel Group
• Advanced - Information about the channels that comprise the
Channel Group.
• PPP - Information about PPP on the Channel Group.
Description
The type of loopback currently used by the port.
Possible values are:
• Near End Payload
• Near End Line
• Near End Inward
• Far End Payload
• Far End Line
Any faults that occurred on the port.
opens the Channel Group wizard, enabling
101.
- Basic information about the Channel Group.
"The
Avaya C360 Manager User Guide