Avaya C360 Manager User Manual page 121

The following table lists the configuration fields in the Serial Port tab of
the USP Configuration dialog box and their descriptions:
Avaya C360 Manager User Guide
Table 7-8. USP Dialog Box - Serial Tab Parameters
Field
Description
Port Type
Port Functionality
Encapsulation
Idle Characters
Bandwidth
Administrative Status
VoIP Queue
Description
The USP port description.
The type of port - Universal Serial Port.
The functionality of the port. Possible values
include:
• V.35 DTE
• X.21 DTE
• EIA530A DTE
The encapsulation method for channel groups
on the port. Possible methods include:
• PPP
• Frame Relay
The bit pattern used to signify an idle line.
Possible patterns include:
• Flags
• Mark
The configured bandwidth of the port in bits per
second.
The state of the selected port. Possible values
are:
• Enable - The port is enabled and can
transmit and receive packets.
• Disable - The port is disabled and cannot
transmit or receive packets.
The state of VoIP queuing on the PPP session.
VoIP queuing changes the length of the high
priority queue providing support for the
configuration of a maximum VoIP delay.
Possible states include:
• On - Voip queuing is active on the PPP
session. This enables the device's queues to
optimally service VoIP applications.
• Off - Voip queuing is not active on the PPP
session.
WAN Configuration
107