Avaya C360 Manager User Manual page 106

Chapter 7
The following table provides a list of the fields in the Frame Relay tab of
the Channel Group dialog box and their descriptions:
92
Table 7-4. Channel Group Dialog Box -
Field
LMI Type
LMI AutoSense
Operational Status
Frame Relay Parameters
Description
Local Management Interface Type. The Data
Link Connection Management scheme used
by the frame relay interface. Possible values
are:
• ANSI
• q933a
• lmi-rev1
• Disable
Local Management Interface Auto-Sensing is
a method for automatically determining the
LMI Type for the interface. Possible values are:
• Enable
• Disable
The operational status of the interface.
Possible statuses include:
• Up - The interface is up and can transmit
and receive packets.
• Down - The interface is down due to
some failure, and cannot transmit or
receive packets.
• Testing - The interface is in testing mode
and cannot transmit or receive regular
data.
• Standby - The interface is a backup
interface and cannot transmit or receive
packets unless the primary interface it
backs up fails.
• Disabled - The interface is disabled. It
cannot transmit or receive packets.
• Partially Down - The interface is up.
However, some interfaces (or PVCs)
layered on top of this interface are Down.
Some packets can be transmitted and
received.
Avaya C360 Manager User Guide